The FH12 Series connectors offer 0.5 mm and 1 mm pitch options for FPC/FFC applications. They feature a rotating one-touch ZIF mechanism for easy operation and a clear tactile click for confirmation. These connectors support high-density mounting, with top & bottom contact and vertical mount types available. Specific versions include FH12F for 0.18 mm thick FPC and FH12S with a reinforced actuator for enhanced durability.
| Item | Specification | Conditions |
|---|---|---|
| Rating Current | 0.5A DC (Note 1) | |
| Operating Temperature Range | -40 to +85 (Note 2) | |
| Storage Temperature Range | -10 to +50 (Note 3) | |
| Voltage Rating | 50V AC | |
| Operating Humidity Range | Relative humidity, 90% max. | |
| Storage Humidity Range | Relative humidity, 90% max. (Not dewed) | |
| Insulation Resistance | 500M ohms minimum | 100V DC |
| Withstanding Voltage | No flashover or insulation breakdown. | 150V AC/1 minute |
| Contact Resistance | 50m ohms maximum | 1mA |
| Durability (Insertion/withdrawal) | Contact resistance: 50m ohms maximum. No damage, cracks, or parts dislocation. No electrical discontinuity of 1s or more | 20 cycles |
| Vibration | Contact resistance: 50m ohms maximum. | Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, for 10 cycles in 3 axial directions |
| Shock | Contact resistance: 50m ohms maximum. No damage, cracks, or parts dislocation. No electrical discontinuity of 1s or more | Acceleration of 981 m/s, 6 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis |
| Humidity (Steady state) | Contact resistance: 50m ohms maximum. Insulation resistance: 50M ohms minimum. | 96 hours at 40 and humidity of 90% to 95% |
| Temperature Cycle | Contact resistance: 50m ohms maximum. Insulation resistance: 50M ohms minimum. No damage, cracks, or parts dislocation. | Temperature: -40 / 15 to 35 / 85 / 15 to 35, Time: 30 min / 2 to 3 min / 30 min / 2 to 3 min, 5 cycles |
| Resistance to Soldering heat | No deformation of components affecting performance. | Reflow: At the recommended temperature profile. Manual soldering: 35010 for 5 seconds |
| Series | Number of Contacts | Pitch | Contact Type | Actuator Type | FPC Thickness | Mounting Type |
|---|---|---|---|---|---|---|
| FH12 | 6, 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 22, 24, 25, 26, 28, 30, 32, 33, 34, 35, 36, 40, 45, 50, 53 | 0.5mm | Bottom Contact | Standard | SMT horizontal mounting type (SH) | |
| FH12 | 5, 6, 7, 8, 9, 11, 12, 16, 17, 22, 26 | 1mm | Bottom Contact | Standard | SMT horizontal mounting type (SH) | |
| FH12 | 10, 12, 13, 15, 16, 17, 18, 20, 22, 24, 26, 30, 32, 33, 34, 36, 40, 45, 49, 50, 60 | 0.5mm | Bottom Contact | Standard | SMT vertical mounting type (SV) | |
| FH12 | 6, 7, 8, 16, 20, 22, 24 | 1mm | Bottom Contact | Standard | SMT vertical mounting type (SV) | |
| FH12A | 10, 12, 15, 16, 18, 20, 22, 24, 26, 28, 29, 30, 32, 33, 34, 36, 40, 42, 45, 50 | 0.5mm | Top Contact | Standard | SMT horizontal mounting type (SH) | |
| FH12F | 6, 8, 10, 12, 13, 14, 15, 16, 18, 20, 22, 24, 25, 26, 28, 30, 32, 34, 36, 40 | 0.5mm | Bottom Contact | Standard | 0.18mm | SMT horizontal mounting type (SH) |
| FH12S | 30, 40, 45, 50, 53 | 0.5mm | Bottom Contact | Strengthened Flip-lock Actuator | SMT horizontal mounting type (SH) | |
| FH12 | 4, 6, 8, 10, 11, 14, 19, 24 | 1mm | Bottom Contact | Eccentric | SMT horizontal mounting type (SH) |
