This specification covers the requirements for application of ANSI C136.41 Dimming Receptacles with integrated gasket, typically used for roadway and area lighting. All contacts are pre-installed and pre-crimped with 14 AWG stranded wire for line voltage AC circuits and 18 AWG wire for signal dimming control voltage DC circuits. Receptacle assemblies are available with 105C and 150C rated wire, and with either 2 or 4 dimming control pad-style contacts.
| Specification | Details |
|---|---|
| Operating Temperature Range | -40 to 85C [-40 to 185F] |
| Wire Gauge (Line Voltage AC) | 14 AWG stranded |
| Wire Gauge (Dimming Control Voltage DC) | 18 AWG |
| Wire Temperature Rating | 105C and 150C options |
| Dimming Control Contacts | 2 or 4 dimming control pad-style contacts |
| Mounting Screw Size | #8 or M4 size flat bottom screws |
| Recommended Screw Torque | 1.0 to 2.0 N-m (Do NOT exceed 3.0 N-m) |
| Mounting Surface Flatness Tolerance | 0.25mm or less |
| Dimensions (Overall) | 49.22 0.13 mm (Length), 24.61 0.13 mm (Width) |
| Mounting Hole Diameter | 5.56 +0.25/0 (2X) |
| Mounting Hole Pattern Diameter | 35.05 +0.50/0 |
