This product is a connector designed for FPC/FFC applications, featuring a "One Action Lock" mechanism for simplified FPC/FFC locking. It supports vertical mounting and is suitable for various electrical and environmental conditions, ensuring reliable performance.
| ITEM | TEST METHOD | REQUIREMENTS | QT | AT |
| Operating temperature range | -55 C to 125 C | |||
| Storage temperature range | -10 C TO 60 C (Packed condition) | |||
| Voltage Rating | 50V AC / DC | |||
| Current Rating | 0.50 A | |||
| Applicable cable (FPC/FFC) | t=0.330.03mm, Gold plating (Ground plate Tin plating) | |||
| General examination | Visually and by measuring instrument. | According to drawing. (note 1) | ||
| Marking | Confirmed visually. | |||
| Voltage proof | 150 V AC for 1 min. | No flashover or breakdown. | ||
| Insulation resistance | 100 V DC. | 500 M MIN. | ||
| Contact resistance | AC 20 mV MAX , 1 mA . [FPC] Initial:60 m MAXAfter each test:80 m MAX (Including bulk resistance L=8mm) [FFC] Initial:80 m MAXAfter each test:100 m MAX (Including bulk resistance L=26mm) | |||
| Vibration | Frequency 10 to 55 Hz, half amplitude 0.75 mm, for 10 cycles in 3 axial directions. | No electrical discontinuity of 1 s. Contact resistance: 80 m MAX(FPC) 100. m MAX(FFC) No damage, crack and looseness of parts. | ||
| Shock | 981 m/s2 , duration of pulse 6 ms at 3 times in 3 both axial directions. | |||
| Mechanical operation | 10 times insertions and extractions. | Contact resistance: 80 m MAX(FPC) 100. m MAX(FFC) No damage, crack and looseness of parts. | ||
| FPC/FFC insertion/extraction force | Measured by applicable FPC/FFC. (Thickness of FPC/FFC shall be t=0.33mm at initial condition.) | Insertion force2+0.35n N MAX (FPC/FFC) (note 2) 2+0.41n N MAX (Shielded FFC) (note 2) Extraction force4+0.32n N MAX (FPC/FFC) (note 2) 4+0.42n N MAX (Shielded FFC) (note 2) | ||
| FPC/FFC retention force | Measured by applicable FPC/FFC. (Thickness of FPC/FFC shall be t=0.33mm at initial condition.) | Direction of extraction (nNumber of contacts) 18+0.08n N MIN (FPC/FFC) (note3) 15+0.1n N MIN (Shielded FFC) (note3) | ||
| Rapid change of temperature | Temperature-55+15TO+35+125+15TO+35C Time 30 2 to 3 30 2 to 3 min Under 1000 cycles. | Contact resistance: 80 m MAX(FPC) 100. m MAX(FFC) Insulation resistance: 50 M MIN. No damage, crack and looseness of parts. | ||
| Damp heat (Steady state) | Exposed at 602 C, Relative humidity 90 to 95 %, 96 h. | |||
| Damp heat,cyclic | Exposed at -10 to +65 c, Relative humidity 90 to 96 %, 10 cycles, TOTAL 240 h. | Contact resistance: 80 m MAX(FPC) 100. m MAX(FFC) Insulation resistance: 1 M MIN. (At high humidity) Insulation resistance: 50 M MIN. (At dry) No damage, crack and looseness of parts | ||
| Dry heat | Exposed at 1252, 1000 h. | Contact resistance: 80 m MAX(FPC) 100. m MAX(FFC) No damage, crack and looseness of parts | ||
| Cold | Exposed at -553, 1000 h. | |||
| Sulphur dioxide | [JIS C 60068-2-42] Exposed at 402 C, Relative humidity 805% 255 ppm for 96 h. | Contact resistance: 80 m MAX(FPC) 100. m MAX(FFC) | ||
| Solderability | Soldered at solder temperature, 2450.3 for immersion duration,30.3 sec. | A new uniform coating of solder shall cover a minimum of 95 % of the surface being immersed. | ||
| Resistance to soldering heat | 1) Reflow soldering : Peak TMP. 250 C MAX . Reflow TMP. over 220 C 60 to 90 sec. Number of reflow : 2 times 2) Soldering irons : TMP. 35010 C for 51 sec . | No deformation of case of excessive looseness of the terminals. (note 4) |
