The FH12 Series connectors offer a compact and reliable solution for FPC/FFC connections, featuring a rotating one-touch ZIF mechanism for easy operation and a clear tactile click for confirmation. They support high-density mounting and are available in top & bottom contact and vertical mount types, with pitch options of 0.5 mm and 1 mm. Specific versions offer reinforced actuators for durability and support for 0.18 mm thick FPC without a stiffener.
| Specification | Value | Conditions |
|---|---|---|
| Current Rating | 0.5A DC (Note 1) | |
| Voltage Rating | 50V AC | |
| Operating Temperature Range | -40 to +85°C (Note 2) | |
| Storage Temperature Range | -10 to +50°C (Note 3) | |
| Operating Humidity Range | Relative humidity, 90% max. | |
| Storage Humidity Range | Relative humidity, 90% max. (Not dewed) | |
| Insulation Resistance | 500M ohms minimum | 100V DC |
| Withstanding Voltage | 150V AC/1 minute | No flashover or insulation breakdown. |
| Contact Resistance | 50m ohms maximum | 1mA |
| Durability (Insertion/withdrawal) | 20 cycles | Contact resistance: 50m ohms maximum. No damage, cracks, or parts dislocation. No electrical discontinuity of 1μs or more. |
| Vibration | Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, for 10 cycles in 3 axial directions | Contact resistance: 50m ohms maximum. No damage, cracks, or parts dislocation. No electrical discontinuity of 1μs or more. |
| Shock | Acceleration of 981 m/s, 6 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis | Contact resistance: 50m ohms maximum. No damage, cracks, or parts dislocation. |
| Humidity (Steady state) | 96 hours at 40°C and humidity of 90% to 95% | Contact resistance: 50m ohms maximum. Insulation resistance: 50M ohms minimum. No damage, cracks, or parts dislocation. |
| Temperature Cycle | 5 cycles | Temperature: -40°C / 15 to 35°C / 85°C / 15 to 35°C, Time: 30 / 2 to 3 / 30 / 2 to 3(minutes). Contact resistance: 50m ohms maximum. Insulation resistance: 50M ohms minimum. No damage, cracks, or parts dislocation. |
| Resistance to Soldering heat | Reflow: At the recommended temperature profile. Manual soldering: 35010°C for 5 seconds. No deformation of components affecting performance. |
| Series | Pitch | Contact Type | Actuator Type | FPC Thickness | Number of Contacts |
|---|---|---|---|---|---|
| FH12 | 0.5mm | Bottom Contact | Standard | 6, 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 22, 24, 25, 26, 28, 30, 32, 33, 34, 35, 36, 40, 45, 50, 53 | |
| FH12 | 0.5mm | Bottom Contact | Eccentric | 4, 6, 8, 10, 11, 14, 19, 24 | |
| FH12 | 0.5mm | Top Contact | Standard | 10, 12, 15, 16, 18, 20, 22, 24, 26, 28, 29, 30, 32, 33, 34, 36, 40, 42, 45, 50 | |
| FH12 | 0.5mm | Vertical Mount | Standard | 10, 12, 13, 15, 16, 17, 18, 20, 22, 24, 26, 30, 32, 33, 34, 36, 40, 45, 49, 50, 60 | |
| FH12 | 1mm | Bottom Contact | Standard | 5, 6, 7, 8, 9, 11, 12, 16, 17, 22, 26 | |
| FH12 | 1mm | Bottom Contact | Eccentric | 5, 6, 7, 8, 16, 20, 22, 24 | |
| FH12 | 1mm | Vertical Mount | Standard | 6, 7, 8, 16, 20, 22, 24 | |
| FH12F | 0.5mm | Bottom Contact | Standard | 0.18 mm | 6, 8, 10, 12, 13, 14, 15, 16, 18, 20, 22, 24, 25, 26, 28, 30, 32, 34, 36, 40 |
| FH12S | 0.5mm | Bottom Contact | Strengthened Flip-lock | 30, 40, 45, 50, 53 |
