The HIROSE FH63S Series is a 0.5mm pitch FPC/FFC connector featuring a low profile of 2.8mm, a lower contact design, and an automatic one-action lock mechanism. It offers 2-point contact for high reliability, dust prevention, and compatibility with FPC, FFC, and shielded FFC for EMI prevention. Designed for enhanced workability and reduced assembly time, it provides high FPC retention force and mating detection. This series is 125 compatible and halogen-free.
| Item | Specification | Conditions |
| Rated Current | 0.5A | |
| Rated Voltage | 50V AC/DC | |
| Operating Temperature | -55 to +125 | Note 1: Includes temperature rise due to current flow. FFC heat resistance is 105. |
| Storage Temperature | -10 to +60 | Note 2: Refers to products stored prior to mounting and use. |
| Operating Humidity Range | RH 90% Max. (No Condensation) | |
| Storage Humidity Range | RH 90% Max. (No Condensation) | |
| Adaptive FPC Contact Thickness | = 0.30 0.05mm | |
| Insulation Resistance | 500M Min. | 100V DC |
| Withstanding Voltage | No flashover or insulation breakdown | 150V AC rms per 1 min. |
| Contact Resistance | 100m Max. | Including FPC/FFC conductor resistance, 1mA AC |
| Mating Durability | 10 cycles | Contact Resistance: 100m Max. No damage, cracks, or parts dislocation. |
| Vibration | No electrical discontinuity of 1s or more | Contact resistance: 100m Max. No damage, cracks, or parts dislocation. Frequency: 10 to 55Hz, single amplitude of 0.75mm, 10 cycles in each of the 3 directions. |
| Shock | No electrical discontinuity of 1s or more | Contact resistance: 100m Max. No damage, cracks, or parts dislocation. Acceleration of 981m/s, duration of 6 ms, sine half-wave waveform, 3 cycles in each of the 3 axes. |
| Damp Heat (Steady State) | Contact resistance: 100m Max. Insulation resistance: 50M Min. No damage, cracks, or parts dislocation. | 96 hours at temperature of +60 and humidity of 90 to 95% |
| Temperature Cycle | Contact resistance: 100m Max. Insulation resistance: 50M Min. No damage, cracks, or parts dislocation. | Temperature: -40 +15 to +35 +125 +15 to +35. Time: 30 2 to 3 30 2 to 3 (Minutes). 5 cycles. |
| Soldering Heat Resistance | No deformation of components affecting performance | Reflow: Recommended Temperature Profile. Manual Soldering: 350 10 for 5 seconds. |
| Series Name | No. of Pos. | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | F (mm) | G (mm) | HRS No. | Purchase Unit (##) |
| FH63S-10S-0.5SH | 10 | 12.7 | 4.5 | 5.55 | 4.0 | 2.0 | 7.15 | 9.9 | CL0580-4414-0-## | 3,500pcs per reel / 500pcs per reel |
| FH63S-20S-0.5SH | 20 | 17.7 | 9.5 | 6.55 | 9.0 | 1.5 | 12.15 | 14.9 | CL0580-4419-0-## | 3,500pcs per reel |
| FH63S-30S-0.5SH | 30 | 22.7 | 14.5 | 5.55 | 14.0 | 2.0 | 17.15 | 19.9 | CL0580-4415-0-## | 3,500pcs per reel |
| FH63S-40S-0.5SH | 40 | 27.7 | 19.5 | 10.55 | 19.0 | 1.5 | 22.15 | 24.9 | CL0580-4416-0-## | 3,500pcs per reel |
| FH63S-50S-0.5SH | 50 | 32.7 | 24.5 | 15.55 | 24.0 | 2.0 | 27.15 | 29.9 | Under Planning | 2,000pcs per reel |
| FH63S-60S-0.5SH | 60 | 37.7 | 29.5 | 20.55 | 29.0 | 1.5 | 32.15 | 34.9 | Under Planning | 2,000pcs per reel |
