The FH28 Series FPC/FFC connectors offer a highly reliable connection with a robust structure, featuring multi-polarized connectors and a reinforced body for high FPC/FFC retention. They simplify operations with an easy-to-use flip lock mechanism that provides a clear tactile click upon mating. These connectors boast increased FPC/FFC retention force, are compatible with standard 0.3mm thick FPC/FFC, and feature a fully molded structure that aids PCB layout. They support automatic pick-n-place mounting and are Halogen-free compliant.
| Item | Specification | Conditions | Notes |
| Rated Current | 0.5A | When energizing rated current to all contacts, use 70% of rated current. | Note 1: When energizing rated current to all contacts, use 70% of rated current. |
| Rated Voltage | AC 50Vrms | ||
| Operating Temperature Range | -40 to +105 | Includes temperature rise caused by current flow. | Note 2: Includes temperature rise caused by current flow. |
| Operating Humidity Range | Relative humidity 90% or less (no condensation) | ||
| Storage Temperature Range | -10 to +50 | Refers to products stored for a long period prior to board mounting and use. | Note 3: The term "storage" here refers to products stored for a long period prior to board mounting and use. The operating temperature and humidity range covers the non-energized condition of connectors after board mounting and the temporary storage. |
| Storage Humidity Range | Relative humidity 90% or less (no condensation) | ||
| Adaptive FPC/FFC contact specifications | t= 0.3 0.05 | ||
| Durability | 20 mating cycles | ||
| Contact Resistance | Maximum of 50m | Measured at 1mA (DC or 1,000Hz) | *including FPC/FFC conductor resistance |
| Insulation Resistance | Minimum of 500M | Measured with DC 100V | |
| Withstanding Voltage | AC 150Vrms is applied for 1 minute. | No flashover or breakdown | |
| Vibration Resistance | Contact Resistance: Maximum of 50m; Insulation Resistance: Minimum of 50M; No damaged, cracked or looseness of parts | Frequency: 10 to 55Hz Single amplitude of 0.75mm for 10 cycles in 3 axial directions; No electric discontinuity of 1s or greater | |
| Shock Resistance | Contact Resistance: Maximum of 50m; Insulation Resistance: Minimum of 50M; No damaged, cracked or looseness of parts | Acceleration of 981m/s, 6ms duration, sine half-wave waveform 3 cycles in each of the 3 axis | |
| Humidity Resistance of Steady State | Contact Resistance: Maximum of 50m; Insulation Resistance: Minimum of 50M; No damaged, cracked or looseness of parts | 96 hours at temperature: 40 and humidity: 90 to 95% | |
| Temperature Cycles | Contact Resistance: Maximum of 50m; Insulation Resistance: Minimum of 50M; No damaged, cracked or looseness of parts | -40/+15 to +35/+105/+15 to +35 Time: 30/2 to 3/30/2 to 3 minutes 5 cycles | |
| Solder Heat Resistance | No damaged, cracked or looseness of parts; No electrical discontinuity of 1s or greater | Reflow: according to the Recommended Temperature Profile; Hand solder: 350 5 for 5 seconds |
