Product Name: FFC/FPC Flat Cable Connector
Scope: This specification covers the 1.0mm Pitch FPC/FFC Connectors.
Application: Used for FPC/FFC connections.
Hanxia Electronic ()
Shenzhen, China
HX
1.0-4P
Huang Bin, Zhang Wei, Luo Xiaochun
| Item | Requirement | Test Condition |
|---|---|---|
| Rated Voltage (MAX) | 50V [AC/DC (virtual value) 50Hz] | |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25 ~ +85 |
| Item | Test Condition | Requirement |
|---|---|---|
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 30 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. | 500M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 250V AC (virtual value) for 1 minute between adjacent terminals or ground. | No Breakdown |
| Locking and Withdrawal Force | Insert and extract applicable FFC (0.3mm thickness) at a speed rate of 253mm/minute. | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute. | 0.25N MIN |
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at a speed rate of less than 10 cycles/minute (no power). | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load (UL 498). | 30 MAX |
| Vibration | DC 1mA energized; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X, Y, Z axes. | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX |
| Shock | DC 1mA energized; 490m/s {50G}, 3 strokes in each X, Y, Z axes. | Discontinuity: 1 ms MAX |
| Heat Resistance | Mate applicable FPC/FFC; placed in 852 air for 96 hours, then returned to room temperature for 1-2 hours. | Contact Resistance: 60 m MAX |
| Cold Resistance | Mate applicable FPC/FFC; placed in -402 air for 96 hours, then returned to room temperature for 1-2 hours. | Contact Resistance: 60 m MAX |
| Humidity | Mate applicable FPC/FFC; placed in 402, 90-95% RH air for 96 hours, then measured within 0.5 hours at room temperature. | Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN |
| Temperature Cycling | Mate applicable FPC/FFC; 5 cycles of: a) -553 for 30 minutes, b) 852 for 30 minutes, with 10-15 minutes at normal temperature and humidity between cycles. | Contact Resistance: 60 m MAX |
| Salt Spray | Mate applicable FPC/FFC; 244 hours exposure to a salt spray from a 51% solution at 352. Washed with water and dried at room temperature after test. | Contact Resistance: 60 m MAX |
| SO2 Gas Resistance | Mate applicable FPC/FFC; 24 hours exposure to 50 5ppm SO2 gas at 402. | Contact Resistance: 60 m MAX |
| NH3 Gas Resistance | Mate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Contact Resistance: 60 m MAX |
| Solderability | Soldering Time: 20.5 sec. Soldering Temperature: 2455 0.2 mm from terminal tip. | Solder Wetting: 95% or more |
| Resistance to Soldering Heat | Soldering Time: 305 sec. Soldering Temperature: 2455 In a hot air furnace. Performed at least 5 times. | Appearance: No damage, deformation |
| Product Shape, Dimensions, and Materials | Material | Remarks |
|---|---|---|
| Main Body | LCP UL 94V-0 | |
| Housing Lock | LCP UL 94V-0 | |
| Terminal | Phosphor Bronze | Metal surface plated with tin |
| Contact | Phosphor Bronze | Metal surface plated with tin |
