Function: 0.5mm Pitch FPC/FFC Connectors
Usage: This specification covers the 0.5mm Pitch FPC/FFC Connectors.
Application Scenarios: Applicable for FPC/FFC connections.
| Item | Test Condition | Requirement |
|---|---|---|
| Rated Voltage (MAX) | AC/DC (Virtual value) 50Hz 50V | |
| Rated Current (MAX) | 0.4A | |
| Ambient temperature Range | -25+85 | |
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 30 m MAX |
| After Repeated Insertion and Withdrawal (20 cycles) | 60 m MAX | |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN |
| After Humidity Test (402, 90-95% RH, 96 hours) | 20 M MIN | |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. No Breakdown. | No Breakdown |
| Dielectric Strength (After Humidity Test) | Must meet 4.1.3 | Must meet 4.1.3 |
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (FFC thickness 0.3mm) | Locking: 1.96*n (N) MAX; Withdrawal: 0.49*n (N) MIN |
| Terminal /Housing Retention Force (Pull the terminal at the speed rate of 25 3mm per minute) | 3.92N MIN | |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Vibration | DC 1mA under condition; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz in 1 minute; Duration: 2 hours in each X.Y.Z. axes. | Appearance: No Damage; Contact Resistance: 60 m MAX; Discontinuity: 1 ms MAX. |
| Shock | DC 1mA under condition; 490m/s {50G}, 3 strokes in each X.Y.Z. axes. | Appearance: No Damage; Discontinuity: 1 ms MAX. |
| Heat Resistance | Mate applicable FPC/FFC; Place in 852 air for 96 hours; Return to room temperature for 1-2 hours. | Appearance: No Damage; Contact Resistance: 60 m MAX |
| Cold Resistance | Mate applicable FPC/FFC; Place in -402 air for 96 hours; Return to room temperature for 1-2 hours. | Appearance: No Damage; Contact Resistance: 60 m MAX |
| Humidity | Mate applicable FPC/FFC; Place in 402, 90-95% RH air for 96 hours; Measure within 0.5 hours after returning to room temperature. | Appearance: No Damage; Contact Resistance: 60 m MAX; Dielectric Strength: Must meet 4.1.3; Insulation Resistance: 20 M MIN |
| Temperature Cycling | 5 cycles of: a) -553 30 minutes; b) 852 30 minutes; with 10-15 minutes at room temp/humidity between cycles. | Appearance: No Damage; Contact Resistance: 60 m MAX |
| Salt Spray | Mate applicable FPC/FFC; 24 4 hours exposure to a salt spray from the 51% solution at 352. Wash with room temp water after test and dry. | Appearance: No Damage, No Corrosion; Contact Resistance: 60 m MAX |
| SO2 Gas | Mate applicable FPC/FFC; 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX |
| NH3 Gas | Mate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage; Contact Resistance: 60 m MAX |
| Solder ability | Soldering Time20.5 sec. Soldering Temperature2455. 0.2 mm from terminal tip. | Solder Wetting: 95% coverage area. |
| Resistance to Soldering heat | Soldering Time305 sec. Soldering Temperature2455. Performed in hot air oven. At least 5 times. | Appearance: No Damage, No Deformation. |
| NAME | MATERIALS | REMARK |
|---|---|---|
| Main body | LCP UL 94V-0 | |
| Housing Lock | LCP UL 94V-0 | |
| Terminal / Contact | Phosphor Bronze | Metal surface plated with tin |
