The FPC0.5-XP connector series is designed for top-entry, pull-type applications, suitable for connecting FFC/FPC cables. It offers a pitch of 0.5mm and supports a wide range of poles from 4 to 60. Key features include a rated voltage of 50V DC/AC, a rated current of 0.5A DC/AC, and a working temperature range of -25C to +85C. The connectors are constructed with durable materials like LCP for the housing and slider, and phosphor bronze for contacts and solder tabs, with tin plating for enhanced conductivity and corrosion resistance.
| Part Number | Pitch (mm) | Poles | Voltage Rating (V) | Current Rating (A) | Working Temperature (C) | Insulation Resistance (M) | Contact Resistance (m) |
|---|---|---|---|---|---|---|---|
| FPC0.5-XP Series | 0.5 | 4~60 | 50 DC/AC | 0.5 DC/AC | -25 ~ +85 | >500 | <30 |
| Item | Test Condition | Requirement |
|---|---|---|
| Contact Resistance | Mate applicable FFC/FPC, 20mV Max, 10mA | 30 m Max |
| Insulation Resistance | Mate applicable FFC/FPC, 500V DC between adjacent terminals | 500 M Min |
| Dielectric Strength | Mate applicable FFC/FPC, 500V AC for 1 minute between adjacent terminals | No Breakdown |
| Insertion/Withdrawal Force | FFC/FPC insertion/withdrawal at 253mm/min; Locking bar insertion: Pin*2N Max; FFC withdrawal: Pin*0.5N Min | Locking bar: Pin*2N Max; FFC Withdrawal: Pin*0.5N Min |
| Terminal Retention Force | Axial pull out force at 253mm/min | 2N Min |
| Fitting Nail Retention Force | Axial pull out force at 253mm/min | 2N Min |
| Durability (20 cycles) | Repeat connect/disconnect FFC/FPC at <10 cycles/min | Contact Resistance 50 m Max |
| Vibration | DC 1mA, 1.5mm P-P amplitude, 10~55~10Hz, 2 hours/axis (X,Y,Z) | Appearance: No Damage; Contact Resistance 60 m Max; Discontinuity 1sec Max |
| Temperature Rise | At max rated current (EIA-364-70 Method 2) | 30C Max |
| Heat Resistance (96 hours at 852C) | Mate FPC, expose to 852C for 96 hours, then condition at room temp. | Appearance: No Damage; Contact Resistance 50 m Max |
| Cold Resistance (96 hours at -402C) | Mate FFC/FPC, expose to -402C for 96 hours, then condition at room temp. | Appearance: No Damage; Contact Resistance 60 m Max |
| Humidity (96 hours at 602C, 90-95% RH) | Mate FFC/FPC, expose to 602C, 90-95% RH for 96 hours, then condition at room temp. | Appearance: No Damage; Contact Resistance 60 m Max; Dielectric Strength: No Breakdown; Insulation Resistance 20 M Min |
| Salt Spray (242 hours at 352C, 51% NaCl) | Mate FPC, expose to salt mist, then rinse and dry. | Appearance: No Damage; Contact Resistance 50 m Max |
| Temperature Cycling (5 cycles) | Mate FFC/FPC, cycle -553C (30min) to +853C (30min), then condition at room temp. | Appearance: No Damage; Contact Resistance 60 m Max |
| Shock (490m/s, 3 times/direction/axis) | Mate FFC/FPC, subject to 50G shock, 3 times in 6 directions (X,Y,Z) (EIA-364-27 Condition A) | Appearance: No Damage; Contact Resistance 60 m Max; Discontinuity 1sec Max |
