This product is designed for various testing and performance evaluation scenarios, focusing on electrical, mechanical, and environmental reliability.
| Item | Test Condition | Requirement |
|---|---|---|
| Contact Resistance | 10mA, 20mV MAX, Dry circuit | < 20 m MAX |
| Insulation Resistance | 500V DC, Between adjacent terminals or ground | 500 M MIN |
| Dielectric Strength | 200V AC for 1 minute, Between adjacent terminals or ground | No Breakdown |
| Locking and Withdrawal Force | Insert and extract FFC at 25 3 mm/minute | Insertion: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal Retention Force | Pull terminal at 25 3 mm/minute | 392N MIN |
| Repeated Insertion and Withdrawal | 20 cycles at 10 cycles/minute | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load (UL 498) | 30C MAX |
| Vibration | 10-55-10Hz/min, Amplitude: 1.5mm P-P, Duration: 2 hours in each X,Y,Z axes | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX |
| Shock | 490m/s {50G}, 3 strokes in each X,Y,Z axes | Appearance: No Damage Discontinuity: 1 ms MAX |
| Heat Resistance | 852C, 96 hours | Appearance: No Damage Contact Resistance: 60 m MAX |
| Cold Resistance | -402C, 96 hours | Appearance: No Damage Contact Resistance: 60 m MAX |
| Humidity Resistance | 402C, 90-95% RH, 96 hours | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN |
| Temperature Cycling | 5 cycles of: a)-553C 30 min, b)852C 30 min | Appearance: No Damage Contact Resistance: 60 m MAX |
| Salt Spray | 48 4 hours exposure to salt spray from 51% solution at 352C | Appearance: No Damage Contact Resistance: 60 m MAX |
