The Y5B/Y5BW FPC/FFC connectors offer a 0.5mm pitch, low-profile, and space-saving design ideal for mobile devices and industrial equipment. Featuring double top and bottom contacts, these connectors support wiring patterns beneath the connector and are available with a lever-open delivery to reduce setup time. The Y5BW model includes a lock hold type with excellent holding force. They support high-speed transmission standards like V-by-One HS.
| Item | Specification | Conditions |
|---|---|---|
| Rated Current | 0.5A/pin contact (except holding contact) | |
| Rated Voltage | 50V AC/DC | |
| Dielectric Strength | 250V AC for 1 min. | No short-circuiting or damage at 1 mA detection current |
| Insulation Resistance | Min. 1,000M (initial) | Using 250V DC megger (applied for 1 min.) |
| Contact Resistance | Max. 100m | Based on JIS C 5402 |
| FPC Holding Force (Y5B) | Min. 0.2N/pin contact pin contacts (initial) | Maximum force to pull out FPC in insertion axis direction with lever closed |
| FPC Holding Force (Y5BW) | Min. 0.2N/pin contact pin contacts + 2.0N (initial) | Maximum force to pull out FPC in insertion axis direction with lever closed |
| Ambient Temperature | 55 to +85C | No icing, no condensation |
| Soldering Heat Resistance (Reflow) | Peak temperature: 260C or less | On the surface of the PC board around the connector terminals |
| Soldering Heat Resistance (Soldering Iron) | 300C within 5 sec. / 350C within 3 sec. | |
| Storage Temperature | 55 to +85C (product only) / 40 to +50C (emboss packing) | No icing, no condensation |
| Thermal Shock Resistance (with FPC mated) | 5 cycles | Conformed to MIL-STD-202F, method 107G |
| Humidity Resistance (with FPC mated) | 120 hours | Conformed to IEC60068-2-78 (402C, 90-95% R.H.) |
| Saltwater Spray Resistance (with FPC mated) | 24 hours | Conformed to IEC60068-2-11 (352C, 51% saltwater) |
| H2S Resistance (with FPC mated) | 48 hours | Conformed to IEC60068-2-11 (402C, 31 ppm gas, 75-80% R.H.) |
| Insertion and Removal Life | 20 times | Repeated insertion and removal: min. 10 sec./time |
| Unit Weight (50 pins) | 0.16 g | |
| Applicable FPC/FFC Thickness | 0.30 mm | |
| Connector Height | 1.0 mm | |
| Connector Depth | 3.20 mm (3.70 mm with lever) | |
| Connector Width (Example: 4 pins) | 4.00 mm | |
| Pitch (Contact and soldering terminals) | 0.500.10 mm | |
| Terminal Coplanarity | 0.1 mm | |
| Models (Y5B) | AYF530435 (4 pins) to AYF535035 (50 pins) | 1.0 mm height |
| Models (Y5BW) | AYF530265T (2 pins) to AYF534865T (48 pins) | 1.0 mm height, lock hold type |
