This product appears to be an electrical connector, likely an FPC/FFC (Flexible Printed Circuit/Flexible Flat Cable) connector, designed for various electronic applications. It undergoes rigorous testing to ensure electrical, mechanical, and environmental performance.
| Item | Test Condition | Requirement |
|---|---|---|
| 4.1.1 Contact Resistance | FPC/FFC mating, 10mA, 20mV MAX | <20 m |
| 4.1.2 Insulation Resistance | Mate applicable FPC/FFC, apply 500V DC between adjacent terminals or ground | 500 M MIN |
| 4.1.3 Dielectric Strength | Mate applicable FPC/FFC, apply 200V AC (virtual value) for 1 minute between adjacent terminals or ground | No Breakdown |
| 4.2.1 Locking and Withdrawal Force | Insert and extract applicable FFC at a speed of 25 3 mm/minute (for 0.3mm FFC) | 1.96*n (N) MAX (Locking), 0.49*n (N) MIN (Withdrawal) |
| 4.2.2 Terminal Retention Force | Pull the terminal at a speed of 25 3 mm/minute | 392 N MIN |
| 4.3.1 Repeated Insertion and Withdrawal | Actuator up to 20 cycles at a speed of less than 10 cycles/minute | Contact Resistance: 60 m MAX; Discontinuity: 1 ms MAX |
| 4.3.2 Temperature Rise | FPC/FFC mating, rated current load (UL498) | 30 C MAX |
| 4.3.3 Appearance | DC 1mA @ 500V DC between adjacent contacts or ground (1.5mm pitch) | No Damage |
| 4.3.4 Shock | 490m/s {50G}, 3 strokes in each X, Y, Z axes | Appearance: No Damage; Discontinuity: 1 ms MAX |
| 4.3.5 Heat Resistance | FPC/FFC mating, 852C, 96 hours | Appearance: No Damage; Contact Resistance: 60 m MAX |
| 4.3.6 Cold Resistance | FPC/FFC mating, -402C, 96 hours | Appearance: No Damage; Contact Resistance: 60 m MAX |
| 4.3.7 Humidity Resistance | Temperature: 402C, Relative Humidity: 90-95%, Duration: 96 Hours | Appearance: No Damage; Contact Resistance: 60 m MAX; Insulation Resistance: 20 M MIN; Dielectric Strength: Must meet 4.1.3 |
| 4.3.8 Temperature Cycling | 5 cycles of: a) -553C 30 minutes, b) 852C 30 minutes (10-15 cycles/hr, 852C) | Appearance: No Damage; Contact Resistance: 60 m MAX |
| 4.3.9 Salt Spray | 48 * 4 hours exposure to a 5% 1% NaCl solution at 352C | Appearance: No Damage; Contact Resistance: 60 m MAX |
| Vibration | 10-55-10Hz/min, Amplitude: 1.5mm P-P, Sweep time: 1 minute, Duration: 2 hours in each X, Y, Z axes | Contact Resistance: 60 m MAX; Discontinuity: 1 ms MAX |
| PIN NO. | DIM.A | DIM.B | DIM.C |
|---|---|---|---|
| 04 | 5.50 | 2.57 | |
| 05 | 6.00 | 3.07 | |
| 06 | 6.50 | 3.57 | |
| 07 | 7.00 | 4.07 | |
| 08 | 7.50 | 4.57 | |
| 09 | 8.00 | 5.07 | |
| 10 | 8.50 | 5.57 | |
| 11 | 9.00 | 6.07 | |
| 12 | 9.50 | 6.57 | |
| 13 | 10.00 | 7.07 | |
| 14 | 10.50 | 7.57 | |
| 15 | 11.00 | 8.07 | |
| 16 | 11.50 | 8.57 | |
| 17 | 12.00 | 9.07 | |
| 18 | 12.50 | 9.57 | |
| 19 | 13.00 | 10.07 | |
| 20 | 13.50 | 10.57 | |
| 21 | 14.00 | 11.07 | |
| 22 | 14.50 | 11.57 | |
| 23 | 15.00 | 12.07 | |
| 24 | 15.50 | 12.57 | |
| 25 | 16.00 | 13.07 | |
| 28 | 17.50 | 13.50 | 14.57 |
| 29 | 18.00 | 14.00 | 15.07 |
| 30 | 18.50 | 14.50 | 15.57 |
| 31 | 19.00 | 15.00 | 16.07 |
| 32 | 19.50 | 15.50 | 16.57 |
| 33 | 20.00 | 16.00 | 17.07 |
| 34 | 20.50 | 16.50 | 17.57 |
| 35 | 21.00 | 17.00 | 18.07 |
| 36 | 21.50 | 17.50 | 18.57 |
| 37 | 22.00 | 18.00 | 19.07 |
| 38 | 22.50 | 18.50 | 19.57 |
| 39 | 23.00 | 19.00 | 20.07 |
| 40 | 23.50 | 19.50 | 20.57 |
| 41 | 24.00 | 20.00 | 21.07 |
| 42 | 24.50 | 20.50 | 21.57 |
| 43 | 25.00 | 21.00 | 22.07 |
| 44 | 25.50 | 21.50 | 22.57 |
| 45 | 26.00 | 22.00 | 23.07 |
| 46 | 26.50 | 22.50 | 23.57 |
| 47 | 27.00 | 23.00 | 24.07 |
| 48 | 27.50 | 23.50 | 24.57 |
| 49 | 28.00 | 24.00 | 25.07 |
| 50 | 28.50 | 24.50 | 25.57 |
| 51 | 29.00 | 25.00 | 26.07 |
| 52 | 29.50 | 25.50 | 26.57 |
| 53 | 30.00 | 26.00 | 27.07 |
| 54 | 30.50 | 26.50 | 27.57 |
| 55 | 31.00 | 27.00 | 28.07 |
| 56 | 31.50 | 27.50 | 28.57 |
| 57 | 32.00 | 28.00 | 29.07 |
| 58 | 32.50 | 28.50 | 29.57 |
