This product is designed for applications requiring reliable electrical connections, particularly with FPC/FFC (Flexible Printed Circuit/Flexible Flat Cable) interfaces. It offers robust performance under various environmental and mechanical stress conditions.
| Item | Test Condition | Requirement |
|---|---|---|
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | < 20 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500 M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown |
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 25 3 mm/minute. | Insertion: 1.96*n (N) MAX, Withdrawal: 0.49*n (N) MIN |
| Terminal Retention Force | Pull the terminal at the speed rate of 25 3 mm/minute. | 392 N MIN |
| Repeated Insertion and Withdrawal | Actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 C MAX |
| Vibration | Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz in 1 minute, Duration: 2 hours in each X,Y,Z axes. | Contact Resistance: 60 m MAX, Discontinuity: 1 ms MAX. |
| Shock | 490m/s {50G}, 3 strokes in each X,Y,Z axes. | Discontinuity: 1 ms MAX. |
| Heat Resistance | 852C, 96 hours. | Contact Resistance: 60 m MAX |
| Cold Resistance | -402C, 96 hours. | Contact Resistance: 60 m MAX |
| Humidity Resistance | Temperature: 402C, Relative Humidity: 90-95%, Duration: 96 Hours. | Contact Resistance: 60 m MAX, Insulation Resistance: 20 M MIN, Dielectric Strength: Must meet 4.1.3. |
| Temperature Cycling | 10-15 cycles of: a)-553C 30 minutes, b) 852C 30 minutes. | Contact Resistance: 60 m MAX |
| Salt Spray | 8 hours exposure to a salt spray from a 5% 1% solution at 352C. | Contact Resistance: 60 m MAX |
