This document outlines the performance specifications for a connector product, covering electrical, mechanical, and environmental aspects. It details various tests and their corresponding requirements to ensure product reliability and performance in different conditions.
| Item | Test Condition | Requirement |
|---|---|---|
| Contact Resistance | FPC/FFC Biir: JHACBIE 20mv BAF; %; Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | <20 m |
| Insulation Resistance | FPC/FFC #46: AHAR iR T M8 T 5 Hhif; Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN |
| Dielectric Strength | FPC/FFC ds A48 Al B 5 M; Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown |
| Locking and Withdrawal Force | YRLIK Ty | B 0.3mm B FFC; AR 25 3mm | gree Locking B CPATHIERN. 808, . Insert and extract applicable FFC at the speed rate of 25 & 3mm/minute. | 1.96*n (N) MAX / 0.49*n (N) MIN |
| Terminal Retention Force | TR EE T3 VLR Ao %h 25+ 3mm (138 AT M A R; Pull the terminal at the speed rate of 25 3mm per minute. | 392N MIN |
| Repeated Insertion and Withdrawal | 20 K AR; Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | Contact Resistance: 60 m MAX |
| Temperature Rise | WE LT @A FPCFFC b BOAH RIS | BELHA; Carrying rated current load. (UL498) | 30 C MAX |
| Appearance (Environmental) | fitRshik EANHEHES); RIUE 1L.5mm: #iZ; Check after tests. | No Damage |
| Vibration | 10-55-10Hz/43: Fibt 2 /e HfbRH m Amplitude: 1.5mm P-P Sweep time: 10-55-10Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. DC ImA EHURES T REHVEHE T 3 AU TARR. | Contact Resistance: 60 m MAX; Discontinuity: 1 ms MAX. |
| Shock | mirpditk B 6 A HH; Lh490m/s2{50G}#di: F3IW it; 490m/s2{50G}, 3 strokes in each X.Y.Z. axes. DC ImA EHURES T REHVEHE T 3 AU TARR. | Appearance: No Damage; Discontinuity: 1 ms MAX. |
| Heat Resistance | m#dE ME 96 /it BB EEFGE 1-2; 85+27C, 96 hour. | Appearance: No Damage; Contact Resistance: 60 m MAX |
| Cold Resistance | fi9EME TE 96 /N A B ERHFILE 1-2; -40+2C, 96 hour. | Appearance: No Damage; Contact Resistance: 60 m MAX |
| Humidity Resistance | g B 90-95%f Ry THE 96 ANFs B; Temperature: 40+2C, Relative Humidity: 90-95%, Duration: 96 Hours. | Appearance: No Damage; Contact Resistance: 60 m MAX; Insulation Resistance: 20 M MIN; Dielectric Strength: Must meet 4.1.3. |
| Temperature Cycling | fIEAEFF HIRLEIE 10-15 4r%h, 85312C 30 4); 1 WiREE 10-15 74f, 6% 5; 5 cycles of: a)-55+3C 30 minutes, b) 85+2C 30 minutes. | Appearance: No Damage; Contact Resistance: 60 m MAX |
| Salt Spray | BHEEM | 008K 48 AN WRIBEHEK; 48 * 4 hours exposure to a salt spray from the 5% 1% solution at 35+2C. | Appearance: No Damage; Contact Resistance: 60m MAX |
