This product appears to be a connector, likely for Flexible Printed Circuits (FPC) or Flexible Flat Cables (FFC). It undergoes various electrical, mechanical, and environmental performance tests to ensure reliability.
Likely used in electronic devices where space is limited and flexible connections are required.
| Item | Test Condition | Requirement |
|---|---|---|
| 4.1.1 Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | < 20 m MAX |
| 4.1.2 Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500 M MIN |
| 4.1.3 Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown |
| 4.2.1 Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 25 3 mm/minute. (FFC thickness: 0.3mm) | Insert: 1.96*n (N) MAX; Withdrawal: 0.49*n (N) MIN |
| 4.2.2 Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3 mm/minute. | 392 N MIN |
| 4.3.1 Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | Contact Resistance: 60 m MAX |
| 4.3.2 Temperature Rise | Carrying rated current load. (UL498) | 30 C MAX |
| 4.3.3 Appearance | DC 1mA @ 500V DC applied for 1 minute between adjacent terminal or ground. | No Damage |
| Vibration | 10-55-10Hz / 1.5mm Amplitude P-P, Sweep time: 10-55-10Hz in 1 minute, Duration: 2 hours in each X,Y,Z axes. DC 1mA. | Contact Resistance: 60 m MAX; Discontinuity: 1 ms MAX. |
| 4.3.4 Shock | 490m/s {50G}, 3 strokes in each X,Y,Z axes. DC 1mA. | Appearance: No Damage; Discontinuity: 1 ms MAX. |
| 4.3.5 Heat Resistance | 852C, 96 hours. | Appearance: No Damage; Contact Resistance: 60 m MAX. |
| 4.3.6 Cold Resistance | -402C, 96 hours. | Appearance: No Damage; Contact Resistance: 60 m MAX. |
| 4.3.7 Humidity | Temperature: 402C, Relative Humidity: 90-95%, Duration: 96 Hours. | Appearance: No Damage; Contact Resistance: 60 m MAX; Insulation Resistance: 20 M MIN; Dielectric Strength: Must meet 4.1.3. |
| 4.3.8 Temperature Cycling | 5 cycles of: a)-553C 30 minutes, b) 852C 30 minutes. 10-15 min transition time. | Appearance: No Damage; Contact Resistance: 60 m MAX. |
| 4.3.9 Salt Spray | 48 * 4 hours exposure to a salt spray from the 5% 1% solution at 352C. | Appearance: No Damage; Contact Resistance: 60 m MAX. |
| PIN NO. | DIM.A | DIM.B | DIM.C |
|---|---|---|---|
| 04 | 5.50 | 2.57 | |
| 05 | 6.00 | 3.07 | |
| 06 | 6.50 | 3.57 | |
| 07 | 7.00 | 4.07 | |
| 08 | 7.50 | 4.57 | |
| 09 | 8.00 | 5.07 | |
| 10 | 8.50 | 5.57 | |
| 11 | 9.00 | 6.07 | |
| 12 | 9.50 | 6.57 | |
| 13 | 10.00 | 7.07 | |
| 14 | 10.50 | 7.57 | |
| 15 | 11.00 | 8.07 | |
| 16 | 11.50 | 8.57 | |
| 17 | 12.00 | 9.07 | |
| 18 | 12.50 | 9.57 | |
| 19 | 13.00 | 10.07 | |
| 20 | 13.50 | 10.57 | |
| 21 | 14.00 | 11.07 | |
| 22 | 14.50 | 11.57 | |
| 23 | 15.00 | 12.07 | |
| 24 | 15.50 | 12.57 | |
| 25 | 16.00 | 13.07 | |
| 26 | 16.50 | 13.57 | |
| 27 | 17.00 | 14.07 | |
| 28 | 17.50 | 14.57 | |
| 29 | 18.00 | 15.07 | |
| 30 | 18.50 | 15.57 | |
| 31 | 19.00 | 16.07 | |
| 32 | 19.50 | 16.57 | |
| 33 | 20.00 | 17.07 | |
| 34 | 20.50 | 17.57 | |
| 35 | 21.00 | 18.07 | |
| 36 | 21.50 | 18.57 | |
| 37 | 22.00 | 19.07 | |
| 38 | 22.50 | 19.57 | |
| 39 | 23.00 | 20.07 | |
| 40 | 23.50 | 20.57 | |
| 41 | 24.00 | 21.07 | |
| 42 | 24.50 | 21.57 | |
| 43 | 25.00 | 22.07 | |
| 44 | 25.50 | 22.57 | |
| 45 | 26.00 | 23.07 | |
| 46 | 26.50 | 23.57 | |
| 47 | 27.00 | 24.07 | |
| 48 | 27.50 | 24.57 | |
| 49 | 28.00 | 25.07 | |
| 50 | 28.50 | 25.57 | |
| 51 | 29.00 | 26.07 | |
| 52 | 29.50 | 26.57 | |
| 53 | 30.00 | 27.07 | |
| 54 | 30.50 | 27.57 | |
| 55 | 31.00 | 28.07 | |
| 56 | 31.50 | 28.57 | |
| 57 | 32.00 | 29.07 | |
| 58 | 32.50 | 29.57 |
