This document details the performance and specifications of a connector product, likely an FPC/FFC connector. It covers electrical, mechanical, and environmental testing criteria to ensure reliability and performance in various applications.
| Item | Test Condition | Requirement |
|---|---|---|
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | <20 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown |
| Item | Test Condition | Requirement |
|---|---|---|
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 25 3mm/minute. (FFC thickness: 0.3mm) | Insertion: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal Retention Force | Pull the terminal at the speed rate of 25 3mm per minute. | 392N MIN |
| Item | Test Condition | Requirement |
|---|---|---|
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL498) | 30 C MAX |
| Appearance | Mate applicable FPC/FFC, apply 1.5mm deflection, 500V DC for 1 minute. | No Damage |
| Vibration | 10-55-10Hz/min Sweep time: 10-55-10Hz in 1 minute. Amplitude: 1.5mm P-P. Duration: 2 hours in each X, Y, Z axes. | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX |
| Shock | 490m/s {50G}, 3 strokes in each X, Y, Z axes. | Appearance: No Damage Discontinuity: 1 ms MAX |
| Heat Resistance | Applicable FPC/FFC, 402C, 96 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Cold Resistance | Applicable FPC/FFC, -402C, 96 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Humidity Resistance | Temperature: 402C, Relative Humidity: 90-95%. Duration: 96 Hours. | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20M MIN |
| Temperature Cycling | Applicable FPC/FFC, -55+3C to 85+2C. 5 cycles of: a) -55+3C 30 minutes, b) 85+2C 30 minutes. 10-15 cycles/min. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Salt Spray | Applicable FPC/FFC, 352C. 48 * 4 hours exposure to a salt spray from the 5% 1% solution. | Appearance: No Damage Contact Resistance: 60 m MAX |
