This section details the performance and reliability of the FPC/FFC connectors through various tests.
| Item | Test Condition | Requirement |
|---|---|---|
| 4.1.1 Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | < 20 m |
| 4.1.2 Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500 M MIN |
| 4.1.3 Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown |
| 4.2.1 Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 25 3mm/minute. | 1.96*n (N) MAX / 0.49*n (N) MIN |
| 4.2.2 Terminal Retention Force | Pull the terminal at the speed rate of 25 3mm per minute. | 392N MIN |
| 4.3.1 Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | Contact Resistance: 60 m MAX |
| 4.3.2 Temperature Rise | Carrying rated current load. (UL498) | 30 C MAX |
| 4.3.3 Appearance | DC 1mA @500V DC for 1 minute between adjacent terminal or ground. | No Damage |
| 4.3.4 Vibration | 10-55-10Hz/min, Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz in 1 minute, Duration: 2 hours in each X,Y,Z. axes. | Contact Resistance: 60 m MAX, Discontinuity: 1 ms MAX |
| 4.3.4 Shock | 490m/s {50G}, 3 strokes in each X,Y,Z. axes. | Appearance: No Damage, Discontinuity: 1 ms MAX |
| 4.3.5 Heat | 852C, 96 hour | Appearance: No Damage, Contact Resistance: 60 m MAX |
| 4.3.6 Cold | -402C, 96 hour | Appearance: No Damage, Contact Resistance: 60 m MAX |
| 4.3.7 Humidity | Temperature: 402C, Relative Humidity: 90-95%, Duration: 96 Hours | Appearance: No Damage, Contact Resistance: 60 m MAX, Insulation Resistance: 20 M MIN, Dielectric Strength: Must meet 4.1.3 |
| 4.3.8 Temperature Cycling | 5 cycles of: a)-553C 30 minutes, b) 852C 30 minutes. | Appearance: No Damage, Contact Resistance: 60 m MAX |
| 4.3.9 Salt Spray | 48 * 4 hours exposure to a salt spray from the 5% 1% solution at 352C. | Appearance: No Damage, Contact Resistance: 60m MAX |
| PIN NO. | DIM.A | DIM.B | DIM.C |
|---|---|---|---|
| 04 | 0.550 | 0.257 | |
| 05 | 0.600 | 0.307 | |
| 06 | 0.650 | 0.357 | |
| 07 | 0.700 | 0.407 | |
| 08 | 0.750 | 0.457 | |
| 09 | 0.800 | 0.507 | |
| 10 | 0.850 | 0.557 | |
| 11 | 0.900 | 0.607 | |
| 12 | 0.950 | 0.657 | |
| 13 | 1.000 | 0.707 | |
| 14 | 1.050 | 0.757 | |
| 15 | 1.100 | 0.807 | |
| 16 | 1.150 | 0.857 | |
| 17 | 1.200 | 0.907 | |
| 18 | 1.250 | 0.957 | |
| 19 | 1.300 | 1.007 | |
| 20 | 1.350 | 1.057 | |
| 21 | 1.400 | 1.107 | |
| 22 | 1.450 | 1.157 | |
| 23 | 1.500 | 1.207 | |
| 24 | 1.550 | 1.257 | |
| 25 | 1.600 | 1.307 | |
| 26 | 1.750 | 1.350 | 1.457 |
| 27 | 1.800 | 1.400 | 1.507 |
| 28 | 1.850 | 1.450 | 1.557 |
| 29 | 1.900 | 1.500 | 1.607 |
| 30 | 1.950 | 1.550 | 1.657 |
| 31 | 2.000 | 1.600 | 1.707 |
| 32 | 2.050 | 1.650 | 1.757 |
| 33 | 2.100 | 1.700 | 1.807 |
| 34 | 2.150 | 1.750 | 1.857 |
| 35 | 2.200 | 1.800 | 1.907 |
| 36 | 2.250 | 1.850 | 1.957 |
| 37 | 2.300 | 1.900 | 2.007 |
| 38 | 2.350 | 1.950 | 2.057 |
| 39 | 2.400 | 2.000 | 2.107 |
| 40 | 2.450 | 2.050 | 2.157 |
| 41 | 2.500 | 2.100 | 2.207 |
| 42 | 2.550 | 2.150 | 2.257 |
| 43 | 2.600 | 2.200 | 2.307 |
| 44 | 2.650 | 2.250 | 2.357 |
| 45 | 2.700 | 2.300 | 2.407 |
| 46 | 2.750 | 2.350 | 2.457 |
| 47 | 2.800 | 2.400 | 2.507 |
| 48 | 2.850 | 2.450 | 2.557 |
| 49 | 2.900 | 2.500 | 2.607 |
| 50 | 2.950 | 2.550 | 2.657 |
| 51 | 3.000 | 2.600 | 2.707 |
| 52 | 3.050 | 2.650 | 2.757 |
| 53 | 3.100 | 2.700 | 2.807 |
| 54 | 3.150 | 2.750 | 2.857 |
| 55 | 3.200 | 2.800 | 2.907 |
| 56 | 3.250 | 2.850 | 2.957 |
