This section details the technical performance and environmental testing of the product, ensuring reliability and durability under various conditions. It covers electrical, mechanical, and environmental aspects.
| Item | Test Condition | Requirement |
|---|---|---|
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | < 20 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500 M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown |
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 25 3mm/minute. | Insertion: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute. | 392N MIN |
| Repeated Insertion and Withdrawal | Actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 C MAX |
| Appearance | Vibration 10-55-10Hz/min, Amplitude: 1.5 P-P, Sweep time: 10-55-10Hz in 1 minute, Duration: 2 hours in each X,Y,Z. axes. | No Damage, Discontinuity: 1 ms MAX. |
| Appearance | Shock 490m/s {50G}, 3 strokes in each X,Y,Z. axes. | No Damage, Discontinuity: 1 ms MAX. |
| Appearance | Heat Resistance 852C, 96 hour. | Contact Resistance: 60 m MAX |
| Appearance | Cold Resistance -402C, 96 hour. | Contact Resistance: 60 m MAX |
| Appearance | Humidity Temperature: 402C, Relative Humidity: 90-95%, Duration: 96 Hours. | No Damage, Contact Resistance: 50 m MAX. Electrical Strength Insulation Resistance: 20 M MIN. |
| Appearance | Temperature Cycling 5 cycles of: a)-553C 30 minutes b) 852C 30 minutes. | Contact Resistance: 60 m MAX |
| Appearance | Salt Spray 24 hours exposure to a salt spray from the 51% solution at 352C. | Contact Resistance: 60 m MAX |
| Appearance | Soldering heat Temperature: 2455C | No Damage |
| Contact Resistance | SO2 Gas 24 hours exposure to 50 5ppm. SO2 gas at 402C. | Contact Resistance: 60 m MAX |
| Appearance | NH3 Gas 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Contact Resistance: 60 m MAX |
| Solder ability | Soldering Time: 20.5 sec. Soldering Temperature: 2455C 0.2 mm from terminal tip. | Solder Wetting: 95% |
| Appearance | Resistance to Soldering Time: 305 sec. Soldering Temperature: 2455C. | No Damage |
| Item | Materials |
|---|---|
| Main body | LCP UL 94V-0 |
| Housing Lock | LCP UL 94V-0 |
| Contact | Phosphor Bronze |
| Item | Standard |
|---|---|
| Reference Unit | Refer to the drawing. |
