This product is designed for reliable electrical connections, featuring robust performance under various environmental and mechanical stresses. It is suitable for applications requiring stable contact resistance, high insulation integrity, and durability through repeated use.
| Item | Test Condition | Requirement |
|---|---|---|
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | <20 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown |
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 25 3mm/minute. | Insertion: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal Retention Force | Pull the terminal at the speed rate of 25 3mm per minute. | 392N MIN |
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 C MAX |
| Vibration | 10-55-10Hz/min, Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz in 1 minute, Duration: 2 hours in each X, Y, Z axes. | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. |
| Shock | 490m/s {50G}, 3 strokes in each X, Y, Z axes. | Appearance: No Damage Discontinuity: 1 ms MAX. |
| Heat Resistance | 852C, 96 hour. | Contact Resistance: 60 m MAX |
| Cold Resistance | -402C, 96 hour. | Contact Resistance: 60 m MAX |
| Humidity Resistance | Temperature: 402C, Relative Humidity: 90-95%, Duration: 96 Hours. | Appearance: No Damage Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20M MIN |
| Temperature Cycling | 10-15 cycles of: a)-553C 30 minutes, b) 852C 30 minutes. | Contact Resistance: 60 m MAX |
| Salt Spray | 48 4 hours exposure to a salt spray from the 51% solution at 352C. | Contact Resistance: 60m MAX |
