Product Overview: This document outlines the product specifications for the FPC connector with a 0.3mm pitch. It details the ratings, performance characteristics, and testing conditions to ensure reliable operation.
N/A
N/A
N/A
N/A
UL498, MIL-STD-202, JIS C0041, JIS C0021, JIS C0020, JIS C0022, JIS C0025, JIS C0023
| ITEM | TEST CONDITION | REQUIRMENT |
|---|---|---|
| Repeated Actuator Insertion/Withdrawal | Insert and withdraw actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | 5 T 10 cycles |
| Contact Resistance | Mate applicable FPC and measure the temperature rise of contact when the maximum AC rated current is passed. (UL498) | 60 m Max. |
| Temperature Rise | Mate applicable FPC and measure the temperature rise of contact when the maximum AC rated current is passed. (UL498) | 30C Max. |
| Vibration | Mate connectors and subject to the following vibration conditions, for period of 2 hours in each of 3 mutually perpendicular axes, passing DC 1mA during the test. Amplitude : 1.5mm P-P, Frequency : 10 55~ 10 Hzin 1 minute. Duration : 2 hours in each of X,Y,Z axes. (MIL-STD-202 Method 201) | Appearance: No Damage, Contact Resistance: 60 m Max., Discontinuity: 1sec Max. |
| Shock | Mate applicable FPC and subject to the following shock conditions. 3 times of shocks shall be applied for each 6 directions along 3 mutually perpendicular axes, passing DC 1 mA current during the test. (JIS C0041/MIL-STD-202 Method 213) | Appearance: No Damage, Contact Resistance: 60 m Max., Discontinuity: 1 sec Max. |
| Heat Resistance | Mate applicable FPC and expose to 85+2C for 96 hours. Upon completion of the exposure period, the test specimens shall be conditioned at ambient room conditions for 1 to 2 hours, after which the specified measurements shall be performed. (JIS C0021 / MIL-STD-202 Method 108) | Appearance: No Damage, Contact Resistance: 60 m Max. |
| Cold Resistance | Mate applicable FPC and expose to -40+2C for 96 hours. Upon completion of the exposure period, the test specimens shall be conditioned at ambient room conditions for 1 to 2 hours, after which the specified measurements shall be performed. (JIS C0020) | Appearance: No Damage, Contact Resistance: 60 m Max. |
| Humidity | Mate applicable FPC and expose to 60 2C, relative humidity 90 to 95% for 96 hours. Upon completion of the exposure period, the test specimens shall be conditioned at ambient room conditions for 1 to 2 hours, after which the specified measurements shall be performed. (JIS C0022 / MIL-STD-202 Method 103) | Appearance: No Damage, Contact Resistance: 60 m Max. |
| Dielectric Strength | Mate applicable FPC, apply 250V AC(rms) for 1 minute between adjacent terminal or ground. (JIS C5402 5.1 / MIL-STD-202 Method 301) | No Breakdown |
| Insulation Resistance | Mate applicable FPC and apply 500V DC between adjacent terminal or ground. (JIS C5402 5.2 / MIL-STD-202 Method 302) | 50 M Min. |
| Temperature Cycling | Mate applicable FPC and subject to the following conditions for 5 cycles. a)-55+3C 30minutes, b) +85+3C 30minutes (Transit time shall be with in 3 minutes) (JIS C0025) | Appearance: No Damage, Contact Resistance: 60 m Max. |
| Salt Spray | Mate applicable FPC and expose to the following salt mist conditions. Upon completion of the exposure period, salt deposits shall be removed by a gentle wash or dip in running water, after which the specified measurements shall be performed. NaCl solution Concentration 51%, Spray time : 48 + 4 hours, Ambient temperature : 352C (JIS C0023 / MIL-STD-202 Method 101) | Appearance: No Damage, Contact Resistance: 60 m Max. |
| ITEM | STANDARD | RATING |
|---|---|---|
| Operating Voltage | N/A | 30V AC (Max.) |
| Current Rating | N/A | 0.2A DC (Max.) |
| Operating Temperature | N/A | -55C ~ +85C (Including terminal temperature rise) |
| Operating Humidity range | N/A | Relative humidity 90%Max |
| Storage temperature range | N/A | -10C ~ +50C |
| Storage Humidity range | N/A | Relative humidity 90%Max. |
| ITEM | TEST CONDITION | REQUIRMENT |
|---|---|---|
| Contact Resistance | Mate applicable FPC and measure by dry circuit, 20mV Max, 10mA. (JIS C5402 5.4) | 40 m Max. |
| Insulation Resistance | Mate applicable FPC and apply 500V DC between adjacent terminal or ground. (JIS C5402 5.2 / MIL-STD-202 Method 302) | 50 M Min. |
| Dielectric Strength | Mate applicable FPC, apply 250V AC(rms) for 1 minute between adjacent terminal or ground. (JIS C5402 5.1 / MIL-STD-202 Method 301) | No Breakdown |
| FPC Retention Force | Insert the actuator, pull the FPC at a rate of 253mm per minute. | Pos. x 0.15N Min. |
| Housing Terminal Retention Force | Apply axial pull out force at the rate of 253 mm/minute on the terminal assembled in the housing. | Pos. x 0.08Kgf {0.8N} Min. |
