This section details the technical specifications and performance tests for a connector product, likely an FPC/FFC connector, covering electrical, mechanical, and environmental performance.
| Item | Test Condition | Requirement |
|---|---|---|
| Contact Resistance | FPC/FFC mating, 10mA, 20mV MAX | <20 m MAX |
| Insulation Resistance | FPC/FFC mating, 500V DC | 500M MIN |
| Dielectric Strength | FPC/FFC mating, 200V AC for 1 minute | No Breakdown |
| Locking and Withdrawal Force | FFC insertion/extraction at 25 3 mm/minute | 1.96*n (N) MAX (Locking), 0.49*n (N) MIN (Withdrawal) |
| Terminal Retention Force | Terminal pull at 25 3 mm/minute | 392N MIN |
| Repeated Insertion and Withdrawal | Actuator up to 20 cycles at < 10 cycles/minute | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load (UL 498) | 30C MAX |
| Vibration | 10-55-10Hz/min, Amplitude: 1.5mm P-P, Duration: 2 hours (X, Y, Z axes) | Contact Resistance: 60 m MAX, Discontinuity: 1 ms MAX |
| Shock | 490m/s {50G}, 3 strokes (X, Y, Z axes) | Appearance: No Damage, Discontinuity: 1 ms MAX |
| Heat Resistance | 852C, 96 hours | Contact Resistance: 60 m MAX, Appearance: No Damage |
| Cold Resistance | -402C, 96 hours | Contact Resistance: 60 m MAX, Appearance: No Damage |
| Humidity Resistance | 402C, 90-95% RH, 96 hours | Contact Resistance: 60 m MAX, Insulation Resistance: 20M MIN, Dielectric Strength: Must meet 4.1.3 |
| Temperature Cycling | -553C to 852C, 5 cycles (30 min each) | Contact Resistance: 60 m MAX, Appearance: No Damage |
| Salt Spray | 352C, 5% NaCl solution, 48 hours | Contact Resistance: 60 m MAX, Appearance: No Damage |
