This specification covers the AFC24-S**FIA-HF, a 0.5mm pitch FPC/FFC connector with a locking mechanism. It is designed for two-sided contact applications and features a front-plug, rear-flip design with a height of 2.0mm and HF halogen-free compliance.
| Item | Specification | Test Condition | Requirement |
| [3] RATINGS | |||
| Rated Voltage (MAX) | 50V | ||
| Rated Current (MAX) | [AC/DC(Virtual value)50Hz] | 0.5A | |
| Ambient Temperature Range | -45 +85 | ||
| [4] PERFORMANCE | |||
| 4.1 Electrical Performance | |||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 20 m MAX | |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN | |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown | |
| 4.2 Mechanical Performance | |||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute | 3.92N MIN | |
| 4.3 Environmental Performance and Others | |||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | Contact Resistance: 60 m MAX | |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX | |
| Vibration | Amplitude: 1.5mm P-P Sweep time: 10-55-10Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes DC 1mA energized state | Discontinuity: 1 ms MAX. Appearance: No Damage | |
| Shock | 490m/s2{50G}, 3 strokes in each X.Y.Z. axes. DC 1mA energized state | Discontinuity: 1 ms MAX. Appearance: No Damage | |
| Heat Resistance | 852, 96 hours Mate applicable FPC/FFC | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Cold Resistance | -402, 96 hours Mate applicable FPC/FFC | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Humidity | Temperature: 402 Relative Humidity: 90-95% Duration: 96 Hours Mate applicable FPC/FFC | Insulation Resistance: 20 M MIN Appearance: No Damage | |
| Temperature Cycling | 5 cycles of: a) -452 30 minutes b) 852 30 minutes Mate applicable FPC/FFC | Contact Resistance: 60 m MAX Appearance: No Damage, Corrosion | |
| Salt Spray | 484 hours exposure to a salt spray from the 51% solution at 352. Mate applicable FPC/FFC | Contact Resistance: 60 m MAX Appearance: No Damage | |
| SO2 Gas | 24 hours exposure to 505ppm. SO2 gas at 402. Mate applicable FPC/FFC | Contact Resistance: 60 m MAX Appearance: No Damage | |
| NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. Mate applicable FPC/FFC | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Solder Ability | Soldering Time: 20.5 sec. Soldering Temperature: 2355 0.2 mm from terminal tip | Solder Wetting: 95% of area covered | |
| Resistance to Soldering Heat | Soldering Time: 50.5 sec. Soldering Temperature: 2605 0.2 mm from terminal tip | Appearance: No Damage, Deformation | |
| [5] PRODUCT SHAPE, DIMENSIONS AND MATERIALS | |||
| Main body | LCP (Natural Color) UL 94V-0 HF Halogen-free | ||
| Housing Lock | LCP (Black) UL 94V-0 HF Halogen-free | ||
| Terminal | Phosphor Bronze | ||
| Contact | Phosphor Bronze | Metal Surface Plated Gold | |
