The AFC06-S**FIA-00 is a 0.5mm pitch FPC/FFC connector with a flip-top design and a locking mechanism, suitable for flexible flat cable applications. It is designed for reliable electrical and mechanical performance within a specified temperature range and is manufactured by Shenzhen Jushuo Electronics Co., Ltd. in China.
| Item | Specification | Test Condition | Requirement |
|---|---|---|---|
| [3] Ratings | |||
| Rated Voltage (MAX) | 50V | ||
| Rated Current (MAX) | 0.5A (AC/DC, 50Hz virtual value) | 0.5A | |
| Ambient Temperature Range | -45 to +85 | ||
| [4] Performance | |||
| 4.1 Electrical Performance | |||
| Contact Resistance | Mate applicable FPC/FFC, dry circuit, 20mV MAX, 10mA | 20 m MAX | |
| Insulation Resistance | Mate applicable FPC/FFC, 500V DC between adjacent terminals or ground | 500 M MIN | |
| Dielectric Strength | Mate applicable FPC/FFC, 200V AC (virtual value) for 1 minute between adjacent terminals or ground | No Breakdown | |
| 4.2 Mechanical Performance | |||
| Locking Force | Insert and extract applicable FFC at 253mm/minute | 1.96*n (N) MAX | |
| Withdrawal Force | Insert and extract applicable FFC at 253mm/minute | 0.49*n (N) MIN | |
| Terminal/Housing Retention Force | Pull terminal at 253mm/minute | 3.92N MIN | |
| 4.3 Environmental and Other Performance | |||
| Repeated Insertion and Withdrawal | 20 cycles at <10 cycles/minute, no power | Contact Resistance: 60 m MAX | |
| Temperature Rise | Carrying rated current load (UL 498) | 30 MAX | |
| Vibration | DC 1mA, 1.5mm amplitude, 10-55-10Hz/min, 2 hours in X, Y, Z axes | Discontinuity: 1 ms MAX; Appearance: No Damage | |
| Shock | DC 1mA, 490m/s {50G}, 3 strokes in each X, Y, Z axes | Discontinuity: 1 ms MAX; Appearance: No Damage | |
| Heat Resistance | Mate FPC/FFC, 96 hours at 852, then 1-2 hours at room temp | Contact Resistance: 60 m MAX; Appearance: No Damage | |
| Cold Resistance | Mate FPC/FFC, 96 hours at -402, then 1-2 hours at room temp | Contact Resistance: 60 m MAX; Appearance: No Damage | |
| Humidity | Mate FPC/FFC, 96 hours at 402, 90-95% RH, then 0.5 hours at room temp | Insulation Resistance: 20 M MIN; Appearance: No Damage | |
| Temperature Cycling | 5 cycles: 30 min at -452, 30 min at 852, with transitions | Contact Resistance: 60 m MAX; Appearance: No Damage, No Corrosion | |
| Salt Spray | 484 hours in 51% salt spray at 352, then wash and dry | Contact Resistance: 60 m MAX; Appearance: No Damage | |
| SO2 Gas Resistance | 24 hours in 505ppm SO2 gas at 402 | Contact Resistance: 60 m MAX; Appearance: No Damage | |
| NH3 Gas Resistance | 40 minutes exposure to NH3 gas from 28% ammonia solution | Contact Resistance: 60 m MAX; Appearance: No Damage | |
| Solderability | Immersion at 2355 for 20.5 sec, 0.2mm from terminal tip | Solder Wetting: 95% | |
| Resistance to Soldering Heat | Immersion at 2605 for 50.5 sec, 0.2mm from terminal tip | Appearance: No Damage, No Deformation | |
