This product specification covers the AFH05 Series FPC Connector, a 0.5mm pitch, right-angle, low-profile, ZIF SMT type connector designed for flexible printed circuit (FPC) applications. It features a flip-cover actuator for secure FPC insertion and removal. The connector is manufactured by SHENZHEN JUSHUO ELECTRONIC CO.,LTD and is available in various configurations based on the number of terminals and plating options. It is suitable for applications requiring a reliable connection with specific electrical and mechanical performance characteristics.
| Model/Part Number | Description | Number of Terminals | Height (H) | Operating Voltage (Max.) | AC Current Rating (Max.) | Operating Temperature | Contact Resistance (Max.) | Insulation Resistance (Min.) | Dielectric Strength | FPC Retention Force (Min.) | Terminal Retention Force (Min.) | Temperature Rise (Max.) | Vibration Resistance | Shock Resistance | Heat Resistance | Cold Resistance | Humidity Resistance | Temperature Cycling | Salt Spray |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AFH05-S**FIA-1H | FPC Connector, 0.5 Pitch, 1.0H | 04~50 | 1.0mm | 50Vrms | 0.5A | -55C ~ +85C | 40 m | 50 M | 250V AC (rms) for 1 minute | Pos. x 0.2N | Pos. x 0.08Kgf {0.8N} | 30C | 10~55~10 Hz, 1.5mm P-P, 2 hrs per axis | 490m/s {50G}, 3 times per direction | 852C for 96 hrs | -402C for 96 hrs | 602C, 90-95% RH for 96 hrs | 5 cycles (-553C 30min / +853C 30min) | 5% NaCl, 352C, 484 hrs |
| AFH34 Series | FPC Connector | 04~50 | N/A | 50Vrms | 0.5A | -55C ~ +85C | 40 m | 50 M | 250V AC (rms) for 1 minute | Pos. x 0.2N | Pos. x 0.08Kgf {0.8N} | 30C | 10~55~10 Hz, 1.5mm P-P, 2 hrs per axis | 490m/s {50G}, 3 times per direction | 852C for 96 hrs | -402C for 96 hrs | 602C, 90-95% RH for 96 hrs | 5 cycles (-553C 30min / +853C 30min) | 5% NaCl, 352C, 484 hrs |
Joining:
Removal:
| Item | Test Condition | Requirement |
|---|---|---|
| Electrical Performance | Contact Resistance (JIS C5402 5.4) | 40 m Max. |
| Insulation Resistance (JIS C5402 5.2 / MIL-STD-202 Method 302) | 50 M Min. | |
| Mechanical Performance | FPC Retention Force | Pos. x 0.2N Min. |
| Terminal Retention Force | Pos. x 0.08Kgf {0.8N} Min. | |
| Environmental Performance | Vibration (MIL-STD-202 Method 201) | Appearance: No Damage, Contact Resistance: 60 m Max., Discontinuity: 1 sec Max. |
| Shock (JIS C0041/MIL-STD-202 Method 213) | Appearance: No Damage, Contact Resistance: 60 m Max., Discontinuity: 1 sec Max. | |
| Heat Resistance (JIS C0021 / MIL-STD-202 Method 108) | Appearance: No Damage, Contact Resistance: 60 m Max. | |
| Cold Resistance (JIS C0020) | Appearance: No Damage, Contact Resistance: 60 m Max. | |
| Reliability Performance | Humidity (JIS C0022 / MIL-STD-202 Method 103) | Appearance: No Damage, Contact Resistance: 60 m Max., Dielectric Strength: No Breakdown, Insulation Resistance: 50 M Min. |
| Temperature Cycling (JIS C0025) | Appearance: No Damage, Contact Resistance: 60 m Max. | |
| Salt Spray (JIS C0023 / MIL-STD-202 Method 101) | Appearance: No Damage, Contact Resistance: 60 m Max. |
NOTE: Please check the re-flow soldering condition by your own devices beforehand. Because the condition changes by the soldering devices, p.c. boards, and so on.
| Parameter | Condition |
|---|---|
| Peak Temp. | 250C MAX. (3Sec. or less) |
| Min. Temp. | 230C MIN. / 2040Sec. |
| Start Temp. | 60 Sec. (6090 Sec.) |
| Time | 30 Sec. |
Tape and Reel Dimensions: See attached drawings.
