The FH62 Series is a space-saving FPC connector featuring a 0.25mm pitch and 1.1mm height. It incorporates an automatic single-action lock design for easy FPC insertion and removal, contributing to assembly time reduction and preventing lever damage. The connector offers high FPC retention force through its lock design and supports 0.3mm-thick FPC. It is also designed for high-speed transmission, supporting eDP (ver1.4), MIPI (D-PHY), and USB3.0 standards with excellent impedance properties.
| Part No. | HRS No. | No. of contacts | Rated current | Operating temperature range | Rated voltage | Insulation resistance | Withstanding voltage | Contact resistance | Durability (insertion / withdrawal) | Vibration | Shock | Humidity (Steady state) | Temperature cycle | Resistance to soldering heat |
| FH62-13S-0.25SHW(**) | 580-4308-0 | 13 | 0.3A | -55C to +85C | 30V AC/DC | 50 min. (100V DC) | No flashover or insulation breakdown (90V AC rms / 1 minute) | 100m max. | 10 cycles (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | 96 hours at 40C and 90% to 95% RH (Contact resistance: 100m max., Insulation resistance: 50M min.) | 5 cycles (-55C / +85C) (Contact resistance: 100m max., Insulation resistance: 50M min.) | Reflow: See recommended temperature profile (Page 8); Manual soldering: 350 10C for 5 seconds |
| FH62-15S-0.25SHW(**) | Under planning | 15 | 0.3A | -55C to +85C | 30V AC/DC | 50 min. (100V DC) | No flashover or insulation breakdown (90V AC rms / 1 minute) | 100m max. | 10 cycles (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | 96 hours at 40C and 90% to 95% RH (Contact resistance: 100m max., Insulation resistance: 50M min.) | 5 cycles (-55C / +85C) (Contact resistance: 100m max., Insulation resistance: 50M min.) | Reflow: See recommended temperature profile (Page 8); Manual soldering: 350 10C for 5 seconds |
| FH62-17S-0.25SHW(**) | 580-4303-0 | 17 | 0.3A | -55C to +85C | 30V AC/DC | 50 min. (100V DC) | No flashover or insulation breakdown (90V AC rms / 1 minute) | 100m max. | 10 cycles (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | 96 hours at 40C and 90% to 95% RH (Contact resistance: 100m max., Insulation resistance: 50M min.) | 5 cycles (-55C / +85C) (Contact resistance: 100m max., Insulation resistance: 50M min.) | Reflow: See recommended temperature profile (Page 8); Manual soldering: 350 10C for 5 seconds |
| FH62-19S-0.25SHW(**) | Under planning | 19 | 0.3A | -55C to +85C | 30V AC/DC | 50 min. (100V DC) | No flashover or insulation breakdown (90V AC rms / 1 minute) | 100m max. | 10 cycles (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | 96 hours at 40C and 90% to 95% RH (Contact resistance: 100m max., Insulation resistance: 50M min.) | 5 cycles (-55C / +85C) (Contact resistance: 100m max., Insulation resistance: 50M min.) | Reflow: See recommended temperature profile (Page 8); Manual soldering: 350 10C for 5 seconds |
| FH62-21S-0.25SHW(**) | 580-4312-0 | 21 | 0.3A | -55C to +85C | 30V AC/DC | 50 min. (100V DC) | No flashover or insulation breakdown (90V AC rms / 1 minute) | 100m max. | 10 cycles (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | 96 hours at 40C and 90% to 95% RH (Contact resistance: 100m max., Insulation resistance: 50M min.) | 5 cycles (-55C / +85C) (Contact resistance: 100m max., Insulation resistance: 50M min.) | Reflow: See recommended temperature profile (Page 8); Manual soldering: 350 10C for 5 seconds |
| FH62-23S-0.25SHW(**) | Under planning | 23 | 0.3A | -55C to +85C | 30V AC/DC | 50 min. (100V DC) | No flashover or insulation breakdown (90V AC rms / 1 minute) | 100m max. | 10 cycles (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | 96 hours at 40C and 90% to 95% RH (Contact resistance: 100m max., Insulation resistance: 50M min.) | 5 cycles (-55C / +85C) (Contact resistance: 100m max., Insulation resistance: 50M min.) | Reflow: See recommended temperature profile (Page 8); Manual soldering: 350 10C for 5 seconds |
| FH62-25S-0.25SHW(**) | Under planning | 25 | 0.3A | -55C to +85C | 30V AC/DC | 50 min. (100V DC) | No flashover or insulation breakdown (90V AC rms / 1 minute) | 100m max. | 10 cycles (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | 96 hours at 40C and 90% to 95% RH (Contact resistance: 100m max., Insulation resistance: 50M min.) | 5 cycles (-55C / +85C) (Contact resistance: 100m max., Insulation resistance: 50M min.) | Reflow: See recommended temperature profile (Page 8); Manual soldering: 350 10C for 5 seconds |
| FH62-27S-0.25SHW(**) | Under planning | 27 | 0.3A | -55C to +85C | 30V AC/DC | 50 min. (100V DC) | No flashover or insulation breakdown (90V AC rms / 1 minute) | 100m max. | 10 cycles (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | 96 hours at 40C and 90% to 95% RH (Contact resistance: 100m max., Insulation resistance: 50M min.) | 5 cycles (-55C / +85C) (Contact resistance: 100m max., Insulation resistance: 50M min.) | Reflow: See recommended temperature profile (Page 8); Manual soldering: 350 10C for 5 seconds |
| FH62-31S-0.25SHW(**) | 580-4310-0 | 31 | 0.3A | -55C to +85C | 30V AC/DC | 50 min. (100V DC) | No flashover or insulation breakdown (90V AC rms / 1 minute) | 100m max. | 10 cycles (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | 96 hours at 40C and 90% to 95% RH (Contact resistance: 100m max., Insulation resistance: 50M min.) | 5 cycles (-55C / +85C) (Contact resistance: 100m max., Insulation resistance: 50M min.) | Reflow: See recommended temperature profile (Page 8); Manual soldering: 350 10C for 5 seconds |
| FH62-35S-0.25SHW(**) | 580-4300-0 | 35 | 0.3A | -55C to +85C | 30V AC/DC | 50 min. (100V DC) | No flashover or insulation breakdown (90V AC rms / 1 minute) | 100m max. | 10 cycles (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | 96 hours at 40C and 90% to 95% RH (Contact resistance: 100m max., Insulation resistance: 50M min.) | 5 cycles (-55C / +85C) (Contact resistance: 100m max., Insulation resistance: 50M min.) | Reflow: See recommended temperature profile (Page 8); Manual soldering: 350 10C for 5 seconds |
| FH62-39S-0.25SHW(**) | 580-4302-0 | 39 | 0.3A | -55C to +85C | 30V AC/DC | 50 min. (100V DC) | No flashover or insulation breakdown (90V AC rms / 1 minute) | 100m max. | 10 cycles (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | 96 hours at 40C and 90% to 95% RH (Contact resistance: 100m max., Insulation resistance: 50M min.) | 5 cycles (-55C / +85C) (Contact resistance: 100m max., Insulation resistance: 50M min.) | Reflow: See recommended temperature profile (Page 8); Manual soldering: 350 10C for 5 seconds |
| FH62-41S-0.25SHW(**) | 580-4305-0 | 41 | 0.3A | -55C to +85C | 30V AC/DC | 50 min. (100V DC) | No flashover or insulation breakdown (90V AC rms / 1 minute) | 100m max. | 10 cycles (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | 96 hours at 40C and 90% to 95% RH (Contact resistance: 100m max., Insulation resistance: 50M min.) | 5 cycles (-55C / +85C) (Contact resistance: 100m max., Insulation resistance: 50M min.) | Reflow: See recommended temperature profile (Page 8); Manual soldering: 350 10C for 5 seconds |
| FH62-51S-0.25SHW(**) | Under planning | 51 | 0.3A | -55C to +85C | 30V AC/DC | 50 min. (100V DC) | No flashover or insulation breakdown (90V AC rms / 1 minute) | 100m max. | 10 cycles (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | 96 hours at 40C and 90% to 95% RH (Contact resistance: 100m max., Insulation resistance: 50M min.) | 5 cycles (-55C / +85C) (Contact resistance: 100m max., Insulation resistance: 50M min.) | Reflow: See recommended temperature profile (Page 8); Manual soldering: 350 10C for 5 seconds |
| FH62-55S-0.25SHW(**) | 580-4309-0 | 55 | 0.3A | -55C to +85C | 30V AC/DC | 50 min. (100V DC) | No flashover or insulation breakdown (90V AC rms / 1 minute) | 100m max. | 10 cycles (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | 96 hours at 40C and 90% to 95% RH (Contact resistance: 100m max., Insulation resistance: 50M min.) | 5 cycles (-55C / +85C) (Contact resistance: 100m max., Insulation resistance: 50M min.) | Reflow: See recommended temperature profile (Page 8); Manual soldering: 350 10C for 5 seconds |
| FH62-61S-0.25SHW(**) | 580-4306-0 | 61 | 0.3A | -55C to +85C | 30V AC/DC | 50 min. (100V DC) | No flashover or insulation breakdown (90V AC rms / 1 minute) | 100m max. | 10 cycles (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | No electrical discontinuity of 1s or more (Contact resistance: 100m max.) | 96 hours at 40C and 90% to 95% RH (Contact resistance: 100m max., Insulation resistance: 50M min.) | 5 cycles (-55C / +85C) (Contact resistance: 100m max., Insulation resistance: 50M min.) | Reflow: See recommended temperature profile (Page 8); Manual soldering: 350 10C for 5 seconds |
