The surface of the plastic parts should be smooth, no rough edges, no obvious shrinkage, defects, cracks and other phenomena.
| Item | Specification | Value | Unit | Tolerance | Material | Plating |
|---|---|---|---|---|---|---|
| DIM A | 0.10 | mm | 0.05 | |||
| Error | 0.50 | mm | 0.05 | |||
| Pitch | 0.3 | mm | Copper Alloy | Tin Plating | ||
| Pitch | 2.00 | mm | Tin Plating | |||
| DIM B | 0.15 | % | ||||
| DIM C | 0.15 | % | ||||
| DIM D | 0.20 | % | ||||
| DIM E | 0.05 | % | ||||
| DIM F | 0.15 | % | ||||
| DIM G | 0.02 | % | ||||
| DIM H | 0.50 | mm | 0.05 | |||
| DIM I | 0.30 | mm | 0.03 | |||
| DIM J | 0.10 | mm | 0.05 | |||
| DIM K | 0.05 | mm | 0.05 | |||
| Rated Voltage | AC/DC | 50 | V | |||
| Contact Resistance | 0.03 | |||||
| Insulation Resistance | 5000 | |||||
| Operating Temperature | -25 to 85 | C |
| Part Number | Description | Pitch | Contacts | Type |
|---|---|---|---|---|
| KH-FGO5-H2.0-22P-SHT | 2.0 | 22 | R4 Down Type CONV. |
