The FH12 Series offers high-density mounting FPC/FFC connectors with a rotating one-touch ZIF mechanism for easy operation and a clear tactile click for confirmation. Available in 0.5mm and 1mm pitch, with top & bottom contact and vertical mount options. The FH12S version features a reinforced actuator for added durability.
| Specification | Value | Conditions | Notes |
|---|---|---|---|
| Current Rating | 0.5A DC | 70% of rating when passing current through all contacts | |
| Voltage Rating | 50V AC | ||
| Operating Temperature Range | -40 to +85C | Includes temperature rise caused by current flow | |
| Storage Temperature Range | -10 to +50C | Refers to products stored prior to mounting and use | |
| Operating Humidity Range | 90% max. Relative humidity | (Not dewed) | |
| Storage Humidity Range | 90% max. Relative humidity | (Not dewed) | |
| Adaptive FPC/FFC Contact | t=0.30.05 | Gold plated | |
| Insulation Resistance | 500M minimum | 100V DC | |
| Withstanding Voltage | 150V AC / 1 minute | No flashover or insulation breakdown | |
| Contact Resistance | 50m maximum | 1mA | |
| Durability (Insertion/withdrawal) | 50m maximum | 20 cycles | No damage, cracks, or parts dislocation. No electrical discontinuity of 1s or more. |
| Vibration | 50m maximum | Frequency: 10 to 55Hz, single amplitude of 0.75mm, for 10 cycles in 3 axial directions | No damage, cracks, or parts dislocation. No electrical discontinuity of 1s or more. |
| Shock | 50m maximum | Acceleration of 981m/s, 6ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis | No damage, cracks, or parts dislocation. |
| Humidity (Steady state) | 50m maximum | 96 hours at 40C and humidity of 90% to 95% | Insulation resistance: 50M minimum. No damage, cracks, or parts dislocation. |
| Temperature Cycle | 50m maximum | -40C / 15 to 35C / 85C / 15 to 35C, Time: 30min / 2 to 3min / 30min / 2 to 3min, 5 cycles | Insulation resistance: 50M minimum. No damage, cracks, or parts dislocation. |
| Resistance to Soldering heat | No deformation of components affecting performance | Reflow: At the recommended temperature profile. Manual soldering: 35010C for 5 seconds |
