Technical Index: The surface of the plastic parts should be smooth, no rough edges, no obvious shrinkage, defects, cracks and other phenomena.
| Part No. | Pitch (mm) | Material | Plating | Dimensions (mm) | Contact Resistance () | Insulation Resistance (M) | Temperature Range (C) | Rated Voltage (V AC/DC) |
|---|---|---|---|---|---|---|---|---|
| KH FGO-5H2-07P SMT | 0.50 0.05 | Copper Alloy | Tin Plating | 0.35 0.05 | <0.03 | 500 | -25 to 85 | 50 |
| KH FGO-5H2-07P SMT | 0.3 0.05 | Copper Alloy | Tin Plating | 0.3 0.05 | <0.03 | 500 | -25 to 85 | 50 |
| KH FGO-5H2-07P SMT | 0.5 0.05 | Copper Alloy | Tin Plating | 0.35 0.05 | <0.03 | 500 | -25 to 85 | 50 |
| KH FGO-5H2-07P SMT | 1.2 0.1 | Copper Alloy | Tin Plating | 2.00 | <0.03 | 500 | -25 to 85 | 50 |
| Dimension | Value (mm) |
|---|---|
| DIM A | 0.10 |
| DIM B | 0.50 0.05 |
| DIM C | 0.15 |
| DIM D | 0.15 |
| DIM E | 0.05 |
| DIM F | 0.30 0.03 |
| DIM G | 8.0 0.15 |
| DIM H | 0.50 0.05 |
| DIM I | 0.05 |
| DIM J | 0.1 |
| DIM K | 0.20 0.02 |
| DIM L | 4.0 Min |
| DIM M | 3.5 Min |
