The FH12 Series offers innovative FPC/FFC connectors with a 0.5mm and 1mm pitch, designed for high-density mounting and ease of operation. Key features include a rotating one-touch ZIF mechanism for simple actuation, a clear tactile click for confirmation of mating, and support for top & bottom contact and vertical mount configurations. The FH12S version provides a reinforced actuator for enhanced durability. These connectors are ideal for applications requiring reliable and space-saving interconnect solutions.
| Specification | Value | Conditions |
|---|---|---|
| Current Rating | 0.5A DC (70% of rating when passing current through all contacts) | Note 1 |
| Voltage Rating | 50V AC | |
| Operating Temperature Range | -40 to +85C (Includes temperature rise caused by current flow) | Note 2 |
| Storage Temperature Range | -10 to +50C | Note 3 |
| Operating Humidity Range | Relative humidity, 90% max. (Not dewed) | |
| Storage Humidity Range | Relative humidity, 90% max. (Not dewed) | |
| Adaptive FPC/FFC Contact | t=0.30.05, Gold plated | |
| Insulation Resistance | 500M minimum | 100V DC |
| Withstanding Voltage | No flashover or insulation breakdown. | 150V AC/1 minute |
| Contact Resistance | 50m maximum | 1mA |
| Durability (Insertion/withdrawal) | Contact resistance: 50m maximum. No damage, cracks, or parts dislocation. No electrical discontinuity of 1s or more. | 20 cycles |
| Vibration | Contact resistance: 50m maximum. No damage, cracks, or parts dislocation. No electrical discontinuity of 1s or more. | Frequency: 10 to 55Hz, single amplitude of 0.75mm, for 10 cycles in 3 axial directions |
| Shock | Contact resistance: 50m maximum. No damage, cracks, or parts dislocation. | Acceleration of 981m/s, 6ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis |
| Humidity (Steady state) | Contact resistance: 50m maximum. Insulation resistance: 50M minimum. No damage, cracks, or parts dislocation. | 96 hours at 40C and humidity of 90% to 95% |
| Temperature Cycle | Contact resistance: 50m maximum. Insulation resistance: 50M minimum. No damage, cracks, or parts dislocation. | -40C / 15 to 35C / 85C / 15 to 35C, Time: 30 / 2 to 3 / 30 / 2 to 3(minutes), 5 cycles |
| Resistance to Soldering heat | No deformation of components affecting performance. | Reflow: At the recommended temperature profile. Manual soldering: 35010C for 5 seconds. |
