The AFC07-S** series FFC/FPC connectors from Shenzhen Jushuo Electronics Co., Ltd. are 0.5mm pitch, ZIF (Zero Insertion Force), right-angle, upper-contact connectors designed for flexible flat cable (FFC) and flexible printed circuit (FPC) applications. These locking connectors are suitable for various electronic devices requiring reliable and secure cable connections.
| Item | Requirement/Condition | Specification |
|---|---|---|
| [1] Scope | ||
| Applicable Product | 0.5mm Pitch FPC/FFC Connectors (Series Locking) | FFC/FPC Flat Cable Connector |
| [3] Ratings | ||
| Rated Voltage (MAX) | - | 50V |
| Rated Current (MAX) | AC/DC (Virtual value) 50Hz | 0.5A |
| Ambient Temperature Range | - | -45 to +85 |
| [4] Performance | ||
| 4.1 Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA | 20 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground | 500 M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground | No Breakdown |
| 4.2 Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 253mm per minute | 3.92N MIN |
| 4.3 Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute (no power) | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load (UL 498) | 30 MAX |
| Vibration | Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz in 1 minute; Duration: 2 hours in each X, Y, Z axes (DC 1mA energized) | Discontinuity: 1 ms MAX; Appearance: No Damage |
| Shock | 490m/s {50G}, 3 strokes in each X, Y, Z axes (DC 1mA energized) | Discontinuity: 1 ms MAX; Appearance: No Damage |
| Heat Resistance | 852, 96 hours (then return to room temp for 1-2 hours) | Contact Resistance: 60 m MAX; Appearance: No Damage |
| Cold Resistance | -402, 96 hours (then return to room temp for 1-2 hours) | Contact Resistance: 60 m MAX; Appearance: No Damage |
| Humidity | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours (measured within 0.5 hours after returning to room temp) | Insulation Resistance: 20 M MIN; Contact Resistance: 60 m MAX; Appearance: No Damage |
| Temperature Cycling | 5 cycles of: 30 minutes at -452, 10-15 minutes at room temp, 30 minutes at 852, 10-15 minutes at room temp | Contact Resistance: 60 m MAX; Appearance: No Damage, Corrosion |
| Salt Spray | 484 hours exposure to a salt spray from the 51% solution at 352 (followed by washing and drying) | Contact Resistance: 60 m MAX; Appearance: No Damage |
| SO2 Gas Resistance | 24 hours exposure to 505ppm SO2 gas at 402 | Contact Resistance: 60 m MAX; Appearance: No Damage |
| NH3 Gas Resistance | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution | Contact Resistance: 60 m MAX; Appearance: No Damage |
| Solderability | Soldering Time: 20.5 sec; Soldering Temperature: 2355; 0.2 mm from terminal tip | Solder Wetting: 95% |
| Resistance to Soldering Heat | Soldering Time: 50.5 sec; Soldering Temperature: 2605; 0.2 mm from terminal tip | Appearance: No Damage, Deformation |
| [2] Product Name and Part Number | ||
| Product Name | - | FFC/FPC Flat Cable Connector |
| Part Number | (Small Batch available in Tube Packaging) | AFC07-S**ECC-00 |
| Part Number | (Bulk shipment recommended in Reel Packaging) | AFC07-S**ECA-00 |
| Pitch | - | 0.5mm |
| Height (H) | - | 2.0mm |
