The FH52 Series connector offers a 0.5mm/1.0mm pitch and a low 2.0mm height, featuring a bottom contact and front flip design for FPC/FFC connections. It provides highly reliable and robust connections with enhanced actuator retention and simplified operation through a flip lock mechanism. The series supports standard 0.3mm thick FPC/FFC and offers design flexibility with no pattern prohibited area on the bottom. It is halogen-free and suitable for automatic pick & place mounting, available in 3,000pcs or 500pcs per reel packaging.
| Specification | Value | Conditions |
|---|---|---|
| Rated Current | 0.5A (70% of rating when passing current through all contacts) | Note 1 |
| Operating Temperature | -40 to +105 | Note 2, Note 3 (FH52K up to 125, FFC up to 105) |
| Rated Voltage | 50V AC | |
| Operating Humidity Range | RH 90% Max. (No Condensation) | |
| Storage Temperature Range | -10 to +50 | Note 4 |
| Storage Humidity Range | RH 90% Max. (No Condensation) | Note 4 |
| Adaptive FPC/FFC Thickness | 0.3 0.05mm | |
| Insulation Resistance | 500M Min. | 100V DC |
| Withstanding Voltage | 150Vms AC for 1 min. | No flashover or insulation breakdown |
| Contact Resistance | 50m Max. | Includes FPC/FFC conductor resistance, 1mA (DC or 1000Hz) |
| Mating Durability | 20 cycles | Contact Resistance: 50m Max. No damage, cracks, or parts dislocation |
| Vibration | Contact Resistance: 50m Max. No damage, cracks, or parts dislocation. Frequency: 10 to 55Hz, single amplitude of 0.75mm, 10 cycles in each of the 3 directions | |
| Shock | Contact Resistance: 50m Max. No damage, cracks, or parts dislocation. Acceleration of 981m/s, duration of 6 ms, sine half-wave waveform, 3 cycles in each of the 3 axes | |
| Humidity (Steady State) | Contact Resistance: 50m Max. Insulation Resistance: 50M Min. No damage, cracks, or parts dislocation. 96 hours at 40 and 90% to 95% RH | |
| Temperature Cycle | Contact Resistance: 50m Max. Insulation Resistance: 50M Min. No damage, cracks, or parts dislocation. Cycle: -40 +15 to +35 +105 +15 to +35 (30 2 to 3 30 2 to 3 Minutes) 5 cycles | |
| Resistance to Soldering Heat | No deformation of components affecting performance. Reflow: Peak 250 Max., 230 or more, 60 seconds or less. Manual: 350 10 for 5 seconds |
