The FH29 Series is a 0.2mm pitch, 1.2mm height FPC connector with a bottom contact and front flip actuator. It features a space-saving design, metal reinforcing fittings for improved operability and easier locking, and a rotating one-touch ZIF mechanism for simple and reliable mating. The molded structure protects contacts and simplifies PCB layout. This connector is suitable for automatic pick-n-place mounting and accepts standard 0.2mm thick FPC.
| Part Number | No. of Contacts | A (mm) | B (mm) | C (mm) | D (mm) | Rated Current | Rated Voltage | Durability | Contact Resistance | Insulation Resistance |
| FH29DJ-44S-0.2SHW(**) | 44 | 10.62 | 8.4 | 9.24 | 9.615 | DC 0.25A (Note 1) | AC/DC 40Vrms | 20 mating cycles | 100m max. | 50M min. |
| FH29DJ-50S-0.2SHW(**) | 50 | 11.82 | 9.6 | 10.44 | 10.815 | |||||
| FH29DJ-70S-0.2SHW(**) | 70 | 15.82 | 13.6 | 14.44 | 14.815 | |||||
| FH29DJ-80S-0.2SHW(**) | 80 | 17.82 | 15.6 | 16.44 | 16.815 | |||||
| FH29DJ-90S-0.2SHW(**) | 90 | 19.82 | 17.6 | 18.44 | 18.815 | |||||
| FH29DJ-100S-0.2SHW(**) | 100 | 21.82 | 19.6 | 20.44 | 20.815 | |||||
| FH29DJ-110S-0.2SHW(**) | 110 | 23.82 | 21.6 | 22.44 | 22.815 | |||||
| FH29DJ-120S-0.2SHW(**) | 120 | 25.82 | 23.6 | 24.44 | 24.815 |
| Item | Specifications | Conditions |
| Operating Temperature Range | -55C to +85C (Note 2) | |
| Operating Humidity Range | 90% max (No condensation) | |
| Storage Temperature Range | -10C to +50C (Note 3) | |
| Storage Humidity Range | 90% max (No condensation) | |
| Recommended FPC Spec. | Thickness = 0.2 0.03mm | Gold plated |
| Withstanding Voltage | AC 120Vrms/1 minute | No flashover or insulation breakdown |
| Vibration | 10 to 55 Hz, single amplitude of 0.75/mm, 10 cycles in each of the 3 directions | No damage, cracks, or parts dislocation. No electrical discontinuity of 1s or longer. |
| Shock | Acceleration of 981 m/s, 6 ms duration, sine half-wave, 3 cycles in each of the 3 axial directions | No damage, cracks, or parts dislocation. No electrical discontinuity of 1s or longer. |
| Humidity (steady state) | 96 hours at 40C and humidity of 90 to 95% | Contact resistance: 100m max. No damage, cracks, or parts dislocation. |
| Temperature Cycle | -55C +15 to +35C +85C +15 to +35C, 30 min 2 to 3 min 30 min 2 to 3 min, 5 cycles | Contact resistance: 100m max. No damage, cracks, or parts dislocation. No deformation of components affecting performance. |
| Resistance to Soldering Heat | Peak temperature 250C max, 60 seconds max at above 230C (Reflow) | |
| Manual Soldering | 350C 10C for 5 seconds |
