This product is a connector designed for reliable electrical connections. It features a robust operating temperature range and is suitable for various environmental conditions, including humidity and temperature fluctuations. The connector is tested against stringent electrical, mechanical, and environmental standards to ensure performance and durability.
| Item | Test Method | Requirements QT | Requirements AT |
|---|---|---|---|
| APPLICABLE STANDARD OPERATING TEMPERATURE RANGE | -40 C TO 105 C | ||
| STORAGE TEMPERATURE RANGE (PACKED CONDITION) | -10 C TO 50 C | ||
| RATING VOLTAGE | 50 V AC / DC | ||
| OPERATING OR STORAGE HUMIDITY RANGE (RELATIVE HUMIDITY) | 90 % MAX (NOT DEWED) | ||
| CURRENT | (note) | 0.5 A | |
| APPLICABLE CABLE | t=0.30.05mm, GOLD PLATING | ||
| CONSTRUCTION GENERAL EXAMINATION | VISUALLY AND BY MEASURING INSTRUMENT. ACCORDING TO DRAWING. | × | |
| MARKING | CONFIRMED VISUALLY. | × | |
| CONTACT RESISTANCE (ELECTRICAL CHARACTERISTICS) | AC 20 mV MAX ( 1 KHz ) , 1 mA . | 50 m MAX. INCLUDING FPC,FFC BULK RESISTANCE (L=8mm) | × |
| INSULATION RESISTANCE | 100 V DC. | 500 M MIN. | × |
| VOLTAGE PROOF | 150 V AC FOR 1 min. | NO FLASHOVER OR BREAKDOWN. | × |
| MECHANICAL OPERATION | 20 TIMES INSERTIONS AND EXTRACTIONS. | CONTACT RESISTANCE: 50 m MAX. NO DAMAGE, CRACK AND LOOSENESS OF PARTS. | – |
| VIBRATION | FREQUENCY 10 TO 55 Hz, HALF AMPLITUDE 0.75 mm, m/s2 FOR 10 CYCLES IN 3 AXIAL DIRECTIONS. | NO ELECTRICAL DISCONTINUITY OF 1 s. CONTACT RESISTANCE: 50 m MAX. NO DAMAGE, CRACK AND LOOSENESS OF PARTS. | – |
| SHOCK | 981 m/s2 , DURATION OF PULSE 6 ms AT 3 TIMES IN 3 BOTH AXIAL DIRECTIONS. | – | |
| FPC RETENTION FORCE | MEASURED BY APPLICABLE FPC. (THICKNESS OF FPC SHALL BE t=0.30mm AT INITIAL CONDITION.) | DIRECTION OF INSERTION: 0.3Nn MIN. VERTICAL DIRECTION TO INSERTION: 0.2Nn MIN. (n:NUMBER OF CONTACTS) | – |
| RAPID CHANGE OF TEMPERATURE | TEMPERATURE-40+15TO+35+105+15TO+35C TIME 30 2 TO 3 30 2 TO 3 min UNDER 5 CYCLES. | CONTACT RESISTANCE: 50 m MAX. INSULATION RESISTANCE: 50 M MIN. NO DAMAGE, CRACK AND LOOSENESS OF PARTS. | × |
| DAMP HEAT (STEADY STATE) | EXPOSED AT 402C, RELATIVE HUMIDITY 90 TO 95 %, 96 h. | × | |
| DAMP HEAT, CYCLIC | EXPOSED AT -10 TO +65 C, RELATIVE HUMIDITY 90 TO 96 %, 10 CYCLES,TOTAL 240 h. | CONTACT RESISTANCE: 50 m MAX. INSULATION RESISTANCE: 1 M MIN. (AT HIGH HUMIDITY) INSULATION RESISTANCE: 50 M MIN. (AT DRY) NO DAMAGE, CRACK AND LOOSENESS OF PARTS. | × |
| DRY HEAT | EXPOSED AT 1052 C, 96 h. | CONTACT RESISTANCE: 50 m MAX. NO DAMAGE, CRACK AND LOOSENESS OF PARTS. | × |
| COLD | EXPOSED AT -403C, 96 h. | × | |
| CORROSION SALT MIST | EXPOSED AT 352C , 5 % SALT WATER SPRAY FOR 96 h. | CONTACT RESISTANCE: 50 m MAX. NO EVIDENCE OF CORROSION WHICH AFFECTS TO OPERATION OF CONNECTOR. | × |
| SULPHUR DIOXIDE [JIS C 60068-2-42] | EXPOSED AT 402 C , RELATIVE HUMIDITY 805% ,255 ppm FOR 96 h. | × | |
| HYDROGEN SULPHIDE [JIS C 60068-2-43] | EXPOSED AT 402 C , RELATIVE HUMIDITY 805% ,10 TO 15 ppm FOR 96 h. | × | |
| RESISTANCE TO SOLDERING HEAT | 1) REFLOW SOLDERING PEAK TMP. 250 C MAX . REFLOW TMP. OVER 230 C WHITIN 60 sec. 2) SOLDERING IRONS : TMP. 3505C FOR 51 sec . | NO DEFORMATION OF CASE OF EXCESSIVE LOOSENESS OF THE TERMINALS. | – |
| SOLDERABILITY | SOLDERED AT SOLDER TEMPERATURE, 2455 C FOR IMMERSION DURATION, 20.5 sec. | A NEW UNIFORM COATING OF SOLDER SHALL COVER A MINIMUM OF 95 % OF THE SURFACE BEING IMMERSED. | – |
