The FH19C and FH19SC Series are low-profile, 0.5mm pitch FPC/FFC connectors designed for miniaturized portable equipment and personal mobile devices. These connectors feature a height of 0.9mm and a width of 3mm, offering reduced PCB footprint and weight compared to previous series. The design allows conductive traces to run under the connector, and the proven Flip-Lock actuator system ensures easy and reliable operation with tactile confirmation of locking. They accept 0.2mm and 0.3mm thick FPC/FFC and are suitable for automated assembly with flat upper surfaces and tape and reel packaging. Available in contact counts from 4 to 50, these connectors satisfy Halogen-free requirements.
| Parameter | Specification | Conditions |
|---|---|---|
| Current Rating | 0.5 A (Note 1) | |
| Voltage Rating | 50 V AC | |
| Operating Temperature Range | -55C to +85C (Note 2) | |
| Operating Humidity Range | Relative humidity 90% max. (No condensation) | |
| Storage Temperature Range | -10C to +50C (Note 3) | |
| Storage Humidity Range | Relative humidity 90% max. (No condensation) | |
| Insulation Resistance | 500 M ohms min. | 100 V DC |
| Withstanding Voltage | No flashover or insulation breakdown | 150 V AC/1 minute |
| Contact Resistance | 100 m ohms max. | 1 mA (Including FPC/FFC conductor resistance) |
| Durability | Contact resistance: 100 m ohms max. | 20 cycles (insertion/withdrawal) |
| Vibration | Contact resistance: 100 m ohms max. | Frequency: 10 to 55 Hz, single amplitude of 0.75mm, 10 cycles in each of the 3 directions |
| Shock | Contact resistance: 100 m ohms max. | Acceleration of 981 m/s, 6 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis. |
| Humidity (Steady state) | Contact resistance: 100 m ohms max. Insulation resistance: 100 M ohms min. | 40C and humidity of 90 to 95% for 96 hours |
| Temperature Cycle | Contact resistance: 100 m ohms max. Insulation resistance: 100 M ohms min. | -55C / +15C to +35C / +85C / +15C to +35C (30 min / 2 to 3 min) for 5 cycles |
| Resistance to Reflow/Soldering Heat | No deformation of components affecting performance. | Reflow: At recommended temperature profile; Manual soldering: 350C 5C for 5 seconds |
| Series | Part Number Example | Number of Contacts | Dimension A (mm) | Dimension B (mm) | Dimension C (mm) | Dimension D (mm) |
|---|---|---|---|---|---|---|
| FH19C | FH19C-04S-0.5SH(**) | 4 | 4 | 1.5 | 2.57 | 3.35 |
| FH19C | FH19C-30S-0.5SH(**) | 30 | 17 | 14.5 | 15.57 | 16.35 |
| FH19C | FH19C-50S-0.5SH(**) | 50 | 27 | 24.5 | 25.57 | 26.35 |
| FH19SC | FH19SC-12S-0.5SH(**) | 12 | 8 | 5.5 | 6.57 | 7.35 |
| FH19SC | FH19SC-30S-0.5SH(**) | 30 | 17 | 14.5 | 15.57 | 16.35 |
| FH19SC | FH19SC-32S-0.5SH(**) | 32 | 18 | 15.5 | 16.57 | 17.35 |
