The FH12 Series connectors offer a rotating one-touch ZIF mechanism for easy operation with light force and a clear tactile click upon successful mating. Designed for high-density mounting, these connectors require less space than slide locking types and can be mounted centrally on the PCB. Available in top & bottom contact and vertical mount types, the series supports both 0.5mm and 1mm pitches. The FH12S version features a reinforced actuator for enhanced durability in specific pin counts.
| Specification | Value | Conditions |
|---|---|---|
| Current Rating | 0.5A DC (Note 1) | |
| Voltage Rating | 50V AC | |
| Operating Temperature Range | -40 to +85C (Note 2) | |
| Storage Temperature Range | -10 to +50C (Note 3) | |
| Operating Humidity Range | Relative humidity, 90% max. | (Not dewed) |
| Storage Humidity Range | Relative humidity, 90% max. | (Not dewed) |
| Insulation Resistance | 500M minimum | 100V DC |
| Withstanding Voltage | No flashover or insulation breakdown. | 150V AC/1 minute |
| Contact Resistance | 50m maximum | 1mA |
| Durability (Insertion/withdrawal) | Contact resistance: 50m maximum | 20 cycles |
| Vibration | Contact resistance: 50m maximum | Frequency: 10 to 55Hz, single amplitude of 0.75mm, for 10 cycles in 3 axial directions |
| Shock | Contact resistance: 50m maximum | Acceleration of 981m/s, 6ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis |
| Humidity (Steady state) | Contact resistance: 50m maximum; Insulation resistance: 50M minimum | 96 hours at 40C and humidity of 90% to 95% |
| Temperature Cycle | Contact resistance: 50m maximum; Insulation resistance: 50M minimum | -40C / 15 to 35C / 85C / 15 to 35C, Time: 30 / 2 to 3 / 30 / 2 to 3 (minutes), 5 cycles |
| Resistance to Soldering heat | No deformation of components affecting performance. | Reflow: At the recommended temperature profile; Manual soldering: 35010C for 5 seconds |
