The AFC06-S**FIA-00 is a 0.5mm pitch FPC/FFC connector designed with a flip-top housing and a 2.0mm height. It features a locking mechanism for secure connection and is suitable for flexible flat cable applications. This connector series is designed for reliable electrical and mechanical performance under various environmental conditions.
| Item | Specification | Requirement |
|---|---|---|
| 1. Scope | ||
| Applicable For | 0.5mm Pitch FPC/FFC Connectors (Locking Series) | |
| 2. Product Name and Part Number | ||
| Product Name | FFC/FPC Flat Cable Connector | |
| Part Number | AFC06-S**FIA-00 | |
| 3. Ratings | ||
| Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | 0.5A (AC/DC, 50Hz virtual value) | |
| Ambient Temperature Range | -45 to +85 | |
| 4. Performance | ||
| 4.1 Electrical Performance | ||
| Contact Resistance | 20 m MAX | Mate applicable FPC/FFC; measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC; apply 500V DC between adjacent terminals or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC; apply 200V AC (virtual value) for 1 minute between adjacent terminals or ground. |
| 4.2 Mechanical Performance | ||
| Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC (0.3mm thickness) at 253mm/minute. 'n' represents the number of positions. |
| Withdrawal Force | 0.49*n (N) MIN | Insert and extract applicable FFC (0.3mm thickness) at 253mm/minute. 'n' represents the number of positions. |
| Terminal/Housing Retention Force | 3.92N MIN | Pull the terminal at 253mm/minute. |
| 4.3 Environmental and Other Performance | ||
| Repeated Insertion and Withdrawal | Contact Resistance 60 m MAX | 20 cycles at a speed rate of less than 10 cycles/minute. |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). |
| Vibration | Discontinuity 1 ms MAX. Appearance: No Damage. | DC 1mA; Amplitude: 1.5mm P-P; Sweep: 10-55-10Hz/min; Duration: 2 hours in each X, Y, Z axes. |
| Shock | Discontinuity 1 ms MAX. Appearance: No Damage. | DC 1mA; 490m/s {50G}, 3 strokes in each X, Y, Z axes. |
| Heat Resistance | Contact Resistance 60 m MAX. Appearance: No Damage. | Mate applicable FPC/FFC; 96 hours at 852, then return to room temperature for 1-2 hours. |
| Cold Resistance | Contact Resistance 60 m MAX. Appearance: No Damage. | Mate applicable FPC/FFC; 96 hours at -402, then return to room temperature for 1-2 hours. |
| Humidity | Insulation Resistance 20 M MIN. Appearance: No Damage. | Mate applicable FPC/FFC; 96 hours at 402, 90-95% RH, then measure within 0.5 hours at room temperature. |
| Temperature Cycling | Contact Resistance 60 m MAX. Appearance: No Damage, no corrosion. | 5 cycles of: 30 min at -452, 10-15 min at room temp/humidity, 30 min at 852, 10-15 min at room temp/humidity. |
| Salt Spray | Contact Resistance 60 m MAX. Appearance: No Damage. | 484 hours exposure to 51% salt spray at 352. Wash with room temperature water and dry after test. |
| SO2 Gas Resistance | Contact Resistance 60 m MAX. Appearance: No Damage. | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas Resistance | Contact Resistance 60 m MAX. Appearance: No Damage. | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting 95% | Soldering Time: 20.5 sec. Soldering Temperature: 2355, 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, no deformation. | Soldering Time: 50.5 sec. Soldering Temperature: 2605, 0.2 mm from terminal tip. |
| 5. Product Shape, Dimensions and Materials | ||
| Refer to drawing | ||
| Main body Material | LCP (Natural) UL 94V-0 | |
| Housing Lock Material | LCP (Black) UL 94V-0 | |
| Terminal Material | Phosphor Bronze | |
| Contact Material | Phosphor Bronze | |
| Contact Plating | Metal Gold Plated | |
