The FH62 Series FPC connector features a 0.25mm pitch and 1.1mm height, offering a space-saving design with a width of 4.0mm. It incorporates an automatic single-action lock mechanism for easy FPC insertion and removal, contributing to assembly time reduction and preventing lever damage. The connector provides high FPC retention force through its lock design and supports 0.3mm-thick FPC. It is engineered for high-speed transmission, supporting eDP (ver1.4), MIPI (D-PHY), and USB3.0 standards with excellent impedance properties. The FH62 Series is halogen-free, meeting IEC 61249-2-21 standards. It is suitable for applications demanding high reliability, such as automotive.
| Specification | Value | Conditions |
| Rated Current | 0.3A | |
| Operating Temperature Range | -55C to +85C | (Note 1) |
| Storage Temperature Range | -10C to +50C | (Note 2) |
| Rated Voltage | 30V AC/DC | |
| Operating Humidity Range | Relative Humidity 90% max. (No condensation) | |
| Storage Humidity Range | Relative Humidity 90% max. (No condensation) | |
| Adaptive FPC/FFC Thickness | 0.3 0.03mm | |
| Insulation Resistance | 50 M min. | 100V DC |
| Withstanding Voltage | No flashover or insulation breakdown | 90V AC rms / 1 minute |
| Contact Resistance | 100 m max. | 1mA (AC) *Including FPC conductor resistance |
| Durability (insertion/withdrawal) | 10 cycles | Contact resistance: 100m max. No damage, cracks, or parts dislocation |
| Vibration | Contact resistance: 100m max. No damage, cracks, or parts dislocation. Frequency: 10 to 55Hz, single amplitude of 0.75mm, 10 cycles in each of the 3 directions | |
| Shock | Contact resistance: 100m max. No damage, cracks, or parts dislocation. Acceleration of 981m/s, duration of 6ms, sine half-wave waveform, 3 cycles in each of the 3 axes | |
| Humidity (Steady state) | Contact resistance: 100m max. Insulation resistance: 50M min. No damage, cracks, or parts dislocation. 96 hours at temperature of 40C and humidity of 90% to 95% | |
| Temperature cycle | Contact resistance: 100m max. Insulation resistance: 50M min. No damage, cracks, or parts dislocation. Temperature: -55C / +15C to +35C / +85C / +15C to +35C. Time: 30 / 2 to 3 / 30 / 2 to 3 (Minutes). 5 cycles | |
| Resistance to soldering heat | No deformation of components affecting performance | Reflow: See recommended temperature profile (Page 8). Number of reflow: 2 times. Manual soldering: 350 10C for 5 seconds |
