The FH43BW/FH43MW Series are 0.2mm/0.25mm pitch, 0.9mm height FPC connectors designed for space-saving applications. They feature a low-profile bottom contact design, easy PCB mounting with staggered leads, and support for high-speed transmissions including eDP (ver. 1.3), MIPI (D-PHY), HDMI (ver 1.3), and USB (3.0). The connectors include a rotating one-touch ZIF mechanism for easy operation, an FPC aligning mechanism, and an insertion check window for visual confirmation. They accept standard 0.2mm thick FPC and are halogen-free.
| Series | Pitch | Height | No. of Contacts | Mated Height | Mounted Depth | Differential Impedance | Current Rating | Voltage Rating | Operating Temperature Range | Storage Temperature Range | Recommended FPC Spec |
|---|---|---|---|---|---|---|---|---|---|---|---|
| FH43BW | 0.2mm | 0.9mm | 21-71 | 0.9mm | 2.77mm | 85-115 Ohm @ 200ps rise time | DC 0.2A (70% of rated current when all contacts electrified) | AC 30 Vrms | -55 to +85 | -10 to +50 | t = 0.2 0.02 |
| FH43MW | 0.25mm | 17, 19, 41, 55 |
| Test Item | Specifications | Conditions |
|---|---|---|
| Insulation Resistance | 50M Min | 100V DC |
| Withstanding Voltage | No flashover or breakdown | 90V AC for 1 Min |
| Contact Resistance | 100m Max. (Excluding FPC conductor resistance) | 1mA |
| Durability | Contact Resistance : 100m Max | 10 cycles |
| Vibration | Contact Resistance : 100m Max | Frequency 10 to 55Hz, Half amplitude 0.75mm for 10 cycles in 3 axial directions |
| Shock | Contact Resistance : 100m Max | Acceleration : 981m/s, Retention time: 6 ms, Semi-sinusoidal 3 times in 3 both axial directions |
| Humidity (Steady State) | Contact Resistance : 100m Max, Insulation Resistance : 50M Min | 96 hours at 40 and humidity of 90 to 95% |
| Temperature Cycle | Contact Resistance : 100m Max, Insulation Resistance : 50M Min | Temperature : -55 +15 to +35 +85 +15 to +35, Time : 30 2 to 3 30 2 to 3 minutes, 5 cycles |
| Resistance to soldering heat | No deformation of case or excessive looseness of the terminal | 1) Reflow : Peak TMP 250 MAX, reflow TMP over 230 within 60 seconds 2) Manual soldering : 350 10 for 5 seconds |
