The FH12 Series connectors offer 0.5 mm and 1 mm pitch options for FPC/FFC applications. They feature a rotating one-touch ZIF mechanism for easy operation and a clear tactile click for confirmation. Designed for high-density mounting, these connectors support top & bottom contact and vertical mount types. Specific versions include FH12F for 0.18 mm thick FPC and FH12S with a reinforced actuator for enhanced durability.
| Specification | Value | Conditions |
|---|---|---|
| Current Rating | 0.5A DC (Note 1) | |
| Voltage Rating | 50V AC | |
| Operating Temperature Range | -40 to +85 (Note 2) | |
| Storage Temperature Range | -10 to +50 (Note 3) | |
| Operating Humidity Range | Relative humidity, 90% max. | |
| Storage Humidity Range | Relative humidity, 90% max. (Not dewed) | |
| Insulation Resistance | 500M ohms minimum | 100V DC |
| Withstanding Voltage | 150V AC/1 minute | No flashover or insulation breakdown. |
| Contact Resistance | 50m ohms maximum | 1mA |
| Durability (Insertion/withdrawal) | 20 cycles | Contact resistance: 50m ohms maximum. No damage, cracks, or parts dislocation. No electrical discontinuity of 1s or more. |
| Vibration | Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, for 10 cycles in 3 axial directions | Contact resistance: 50m ohms maximum. No damage, cracks, or parts dislocation. No electrical discontinuity of 1s or more. |
| Shock | Acceleration of 981 m/s, 6 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis | Contact resistance: 50m ohms maximum. No damage, cracks, or parts dislocation. |
| Humidity (Steady state) | 96 hours at 40 and humidity of 90% to 95% | Contact resistance: 50m ohms maximum. Insulation resistance: 50M ohms minimum. No damage, cracks, or parts dislocation. |
| Temperature Cycle | 5 cycles | Temperature: -40 / 15 to 35 / 85 / 15 to 35, Time: 30 min / 2 to 3 min / 30 min / 2 to 3 min. Insulation resistance: 50M ohms minimum. No damage, cracks, or parts dislocation. |
| Resistance to Soldering heat | Reflow: At the recommended temperature profile. Manual soldering: 35010 for 5 seconds. | No deformation of components affecting performance. |
