The FH12 Series connectors offer a rotating one-touch ZIF mechanism for easy operation and a clear tactile click upon successful mating. Designed for high-density mounting, these connectors require less space than slide locking types and can be mounted in the center of the PCB. Available in top contact, bottom contact, and vertical mount configurations, they also come in both 0.5mm and 1mm pitch options. The FH12S version features a reinforced actuator for added security against breakage.
| Specification | Value | Conditions |
|---|---|---|
| Current Rating | 0.5A DC (Note 1) | |
| Operating Temperature Range | _40 to +85C (Note 2) | |
| Storage Temperature Range | _10 to +50C (Note 3) | |
| Voltage Rating | 50V AC | |
| Operating Humidity Range | Relative humidity, 90% max. | (Not dewed) |
| Storage Humidity Range | Relative humidity, 90% max. | (Not dewed) |
| Insulation Resistance | 500M minimum | 100V DC |
| Withstanding Voltage | No flashover or insulation breakdown. | 150V AC/1 minute |
| Contact Resistance | 50m maximum | 1mA |
| Durability (Insertion/withdrawal) | Contact resistance: 50m maximum | 20 cycles |
| Vibration | Contact resistance: 50m maximum | Frequency: 10 to 55Hz, single amplitude of 0.75mm, for 10 cycles in 3 axial directions |
| Shock | Contact resistance: 50m maximum | Acceleration of 981m/s, 6ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis |
| Humidity (Steady state) | Contact resistance: 50m maximum; Insulation resistance: 50M minimum. | 96 hours at 40C and humidity of 90% to 95% |
| Temperature Cycle | Contact resistance: 50m maximum; Insulation resistance: 50M minimum. | -40C / 15 to 35C / 85C / 15 to 35C, Time: 30 / 2 to 3 / 30 / 2 to 3 (minutes), 5 cycles |
| Resistance to Soldering heat | No deformation of components affecting performance. | Reflow: At the recommended temperature profile; Manual soldering: 35010C for 5 seconds |
FH 12 A - 10 (4) S A - 0.5 SH (**) q r t e w u y i o !0
q: Series Name (FH)
w: Series No. (12)
e: Standard type (Blank), Top contact type (A), Type with strengthed flip-lock actuator (S)
r: Number of contacts (Standard type), Number of contacts in 0.5mm housing (Eccentric type)
t: Standard type (Blank), Eccentric type (Number of contacts)
y: Contact alignment (Single)
u: Eccentric direction (Blank: standard type, A: Eccentric type)
i: Contacts Pitch (0.5mm, 1mm)
o: Contact type (SH: SMT horizontal mounting type, SVA: SMT vertical mounting type)
!0: Plating specification ((54): Selective gold plated, (55): Gold plated, (1)(98): Gold plated)
| Part No. | No. of Contacts | A | B | C | D |
|---|---|---|---|---|---|
| FH12-6S-0.5SH(**) | 6 | 2.5 | 06.1 | 3.57 | 5 |
| FH12-8S-0.5SH(**) | 8 | 3.5 | 07.1 | 4.57 | 5 |
| FH12-10S-0.5SH(**) | 10 | 4.5 | 08.1 | 5.57 | 5 |
| FH12-11S-0.5SH(**) | 11 | 5.0 | 08.6 | 6.07 | 5 |
| FH12-12S-0.5SH(**) | 12 | 5.5 | 09.1 | 6.57 | 5 |
| FH12-13S-0.5SH(**) | 13 | 6.0 | 09.6 | 7.07 | 5 |
| FH12-14S-0.5SH(**) | 14 | 6.5 | 10.1 | 7.57 | 5 |
| FH12-15S-0.5SH(**) | 15 | 7.0 | 10.6 | 8.07 | 5 |
| FH12-16S-0.5SH(**) | 16 | 7.5 | 11.1 | 8.57 | 5 |
| FH12-17S-0.5SH(**) | 17 | 8.0 | 11.6 | 9.07 | 5 |
| FH12-18S-0.5SH(**) | 18 | 8.5 | 12.1 | 9.57 | 5 |
| FH12-19S-0.5SH(**) | 19 | 9.0 | 12.6 | 10.07 | 5 |
| FH12-20S-0.5SH(**) | 20 | 9.5 | 13.1 | 10.57 | 5 |
| FH12-22S-0.5SH(**) | 22 | 10.5 | 14.1 | 11.57 | 5 |
| FH12-24S-0.5SH(**) | 24 | 11.5 | 15.1 | 12.57 | 5 |
| FH12-25S-0.5SH(**) | 25 | 12.0 | 15.6 | 13.07 | 5 |
| FH12-26S-0.5SH(**) | 26 | 12.5 | 16.1 | 13.57 | 5 |
| FH12-28S-0.5SH(**) | 28 | 13.5 | 17.1 | 14.57 | 5 |
| FH12-30S-0.5SH(**) | 30 | 14.5 | 18.1 | 15.57 | 5 |
| FH12-32S-0.5SH(**) | 32 | 15.5 | 19.1 | 16.57 | 5 |
| FH12-33S-0.5SH(**) | 33 | 16.0 | 19.6 | 17.07 | 5 |
| FH12-34S-0.5SH(**) | 34 | 16.5 | 20.1 | 17.57 | 5 |
| FH12-35S-0.5SH(**) | 35 | 17.0 | 20.6 | 18.07 | 5 |
| FH12-36S-0.5SH(**) | 36 | 17.5 | 21.1 | 18.57 | 5 |
| FH12-40S-0.5SH(**) | 40 | 19.5 | 23.1 | 20.57 | 5 |
| FH12-45S-0.5SH(**) | 45 | 22.0 | 25.6 | 23.07 | 5 |
| FH12-50S-0.5SH(**) | 50 | 24.5 | 28.1 | 25.57 | 5 |
| FH12-53S-0.5SH(**) | 53 | 26.0 | 29.6 | 27.07 | 5 |
| Part No. | No. of Contacts | A | B | C | D |
|---|---|---|---|---|---|
| FH12S-30S-0.5SH(**) | 30 | 14.5 | 18.1 | 19.1 | 2.4 |
| FH12S-40S-0.5SH(**) | 40 | 19.5 | 23.1 | 24.1 | 2.4 |
| FH12S-45S-0.5SH(**) | 45 | 22.0 | 25.6 | 26.6 | 2.4 |
| FH12S-50S-0.5SH(**) | 50 | 24.5 | 28.1 | 29.1 | 2.4 |
| FH12S-53S-0.5SH(**) | 53 | 26.0 | 29.6 | 30.6 | 2.4 |
| Part No. | No. of Contacts | A | B | C | D | E |
|---|---|---|---|---|---|---|
| FH12A-10S-0.5SH(**) | 10 | 4.5 | 8.1 | 7.1 | 2 | 5.6 |
| FH12A-12S-0.5SH(**) | 12 | 5.5 | 9.1 | 8.1 | 2 | 5.6 |
| FH12A-15S-0.5SH(**) | 15 | 7.0 | 10.6 | 9.6 | 2 | 5.6 |
| FH12A-16S-0.5SH(**) | 16 | 7.5 | 11.1 | 10.1 | 2 | 5.6 |
| FH12A-18S-0.5SH(**) | 18 | 8.5 | 12.1 | 11.1 | 2 | 5.6 |
| FH12A-20S-0.5SH(**) | 20 | 9.5 | 13.1 | 12.1 | 2 | 5.6 |
| FH12A-22S-0.5SH(**) | 22 | 10.5 | 14.1 | 13.1 | 2 | 5.6 |
| FH12A-24S-0.5SH(**) | 24 | 11.5 | 15.1 | 14.1 | 2 | 5.6 |
| FH12A-26S-0.5SH(**) | 26 | 12.5 | 16.1 | 15.1 | 2 | 5.6 |
| FH12A-28S-0.5SH(**) | 28 | 13.5 | 17.1 | 16.1 | 2 | 5.6 |
| FH12A-29S-0.5SH(**) | 29 | 14.0 | 17.6 | 16.6 | 2 | 5.6 |
| FH12A-30S-0.5SH(**) | 30 | 14.5 | 18.1 | 17.1 | 2 | 5.6 |
| FH12A-32S-0.5SH(**) | 32 | 15.5 | 19.1 | 18.1 | 2 | 5.6 |
| FH12A-33S-0.5SH(**) | 33 | 16.0 | 19.6 | 18.6 | 2 | 5.6 |
| FH12A-34S-0.5SH(**) | 34 | 16.5 | 20.1 | 19.1 | 2 | 5.6 |
| FH12A-36S-0.5SH(**) | 36 | 17.5 | 21.1 | 20.1 | 2 | 5.6 |
| FH12A-40S-0.5SH(**) | 40 | 19.5 | 23.1 | 22.1 | 2 | 5.6 |
| FH12A-42S-0.5SH(**) | 42 | 20.5 | 24.1 | 23.1 | 2 | 5.6 |
| FH12A-45S-0.5SH(**) | 45 | 22.0 | 25.6 | 24.6 | 2 | 5.6 |
| FH12A-50S-0.5SH(**) | 50 | 24.5 | 28.1 | 27.1 | 2 | 5.6 |
