This product specification defines the product performance and the test methods to ascertain the performance of the T-FLASH., which is designed and manufactured by Company. The T-FLASH connector is a type of external welding T-Flash connector.
(Twshetime)
Taiwan Factory: , China Factory:
TFW1X-XXXX-X000-A
T-Flash type CONN.
TFW11-N1S1-2000-A
LCP UL94-V0
Copper Alloy
SUS201
Nickel Underlayer: 40u" MIN, Contact Area Gold: 0.5u" MIN, Solder Leg Area Matte Tin: 80u" MIN.
Contact: Gold Flash Plated. Shell: Nickel Plated.
RoHS compliant materials, UL498 standard.
Packaged according to customer specified requirements, typically in tray or carrier tape. Specifics per purchase order and customer drawing.
Manufacturers name, industry recognized logo, or customer approved marks.
Temperature: -25 to +85, Relative humidity: 80%, Not to store in corrosive environments. Re-qualification test required if storage exceeds 6 months.
| Item | Requirements | Test Methods | Initial | After Durability | After Environmental |
|---|---|---|---|---|---|
| Contact resistance (Low Level) | 80 m Max. | Subject mated contacts assembled in housing to closed circuit of 10 mA max. at open circuit voltage of 20 mV max. | 80 m | - | - |
| Insulation resistance | 1000 M Min. | Measure by applying test potential between the adjacent contacts, and between the contacts and ground in the mated connector. MIL-STD-202, Method 302, Condition B (500 V DC10%). | 1000 M | - | - |
| Dielectric Strength | 500 V AC for 1 minute. | Connector must withstand test potential. | - | - | - |
| Electrical Characteristics | Value | Unit | Notes |
|---|---|---|---|
| Contact Current Rating | 0.5 | A MAX | - |
| Contact Resistance | 100 | m MAX | - |
| Insulation Resistance | 500 | M MIN | - |
