This document outlines the specifications for a DC Power Jack (DC) with the model number HX DC007B-2.5-J. It details the electrical, mechanical, and environmental characteristics of the component.
Shenzhen Hanxia Electronic Co., Ltd
DC
HX DC007B-2.5-J
Shenzhen, China
| Specification | Value | Unit | Test Condition |
|---|---|---|---|
| Rated Voltage | 20 | V DC | |
| Rated Current | 7.0 | A | |
| Contact Resistance | 30 | m MAX | 1KHz small current |
| Insulation Resistance | 100 | M Min | DC500V for 1 minute |
| Withstand Voltage | 500 | V AC | AC500V for 1 minute |
| Mate Force | 3-30 | N | |
| Unmate Force | 3-30 | N | |
| Durability | 5000 | Cycles | |
| Temperature Range | -25~+70 |
| Test Type | Parameter | Specification | Condition |
|---|---|---|---|
| Soldering Test | Terminal Dipping | 2mm depth in solder bath at 2305 for 3 sec | |
| Durability (Life Test) | Cycles | 5000 | 20-30 cycles per minute, unloading |
| Durability (Life Test) | Contact Resistance | 40m max | |
| Durability (Life Test) | Drive Force | 3-30N | Initial value |
| Heat Test | Temperature & Time | 802 for 48 hours | Keep in normal condition for 30 minutes after test |
| Heat Test | Contact Resistance | 50m max | After test |
| Heat Test | Insulation Resistance | 100M min | After test |
| Heat Test | Mechanical/Electrical Integrity | No breakdown | After test |
| Humidity Test | Temperature & Humidity | 402, 90-95% RH for 48 hours | Keep in normal condition for 30 min after test |
| Cold Test | Temperature | -302 for 48 hours | Keep in normal condition for 30 min after test |
