This specification covers the production and inspection of a connector series, suitable for various electronic applications. It details material, plating, and performance requirements to ensure reliable connectivity.
| Item | Description | Requirement |
| Series | 1502 Series Pin | N/A |
| General Tolerances | X.X | 3.00 |
| X.XX | 2.00 | |
| X.XXX | 1.00 | |
| X. | 3.00 | |
| X.X | 2.00 | |
| X.XX | 1.00 | |
| X.XXX | 0.50 | |
| Applicable PC board thickness | 1.2mm~1.6mm | |
| Temperature Range | -25~85 | |
| Rated Voltage | 250V AC/DC | |
| Rated Current | 2A | |
| Insulation Resistance | 1000M | |
| Dielectric Strength | 500V AC/minute | |
| Male Contact Retention Force | PIN Pin Retention Force | 15N per pin |
| Female Contact Retention Force | Terminal Retention Force | 15N per pin |
| Plug-in Force | 3N per pin | |
| Plug-out Force | 0.5N per pin | |
| Solderability | Time | 2.50.5S |
| Temperature | 2305 | |
| Area of Soldering | 95% | |
| Resistance to Soldering Heat | Time | 51S |
| Temperature | 2305 | |
| Appearance | No Damage | |
| Heat Test | Time | 96h |
| Temperature | +853 | |
| Appearance | No Damage | |
| Contact Resistance | 20 m | |
| Cold Test | Time | 48h |
| Temperature | -253 | |
| Appearance | No Damage | |
| Contact Resistance | 20 m | |
| Temperature Cycling | Low temperature | -253 |
| High temperature | 853 | |
| Cycles | 5 cycles | |
| Appearance | No Damage | |
| Contact Resistance | 20 m | |
| Constant Humidity Heat | Temperature | 602 |
| Relative humidity | 90%-96% RH | |
| Time | 96h | |
| Appearance | No Damage | |
| Contact Resistance | 20 m | |
| Insulation Resistance | 100M | |
| Salt Spray Test | Salt concentration | 51% |
| Temperature | 352 | |
| Time | 162h | |
| Appearance | No Damage | |
| Contact Resistance | 20 m |
