This specification covers the production and inspection of a connector, specifically a pin header (). It is designed for general series type strip connectors. The product is suitable for various environmental conditions and electrical applications.
| Item | Requirement | Details | |
|---|---|---|---|
| SCOPE | Production and inspection of Connector | General series type strip connectors (pin header) | |
| USE CONDITION | Ambient temperature Range | -25+85 | |
| USE CONDITION | Applicable Wire Sizes | AWG#22#30 | |
| USE CONDITION | Applicable PC board thickness | 1.2~1.6 mm | |
| Appearance | Product surface without defect, dirt, crack, mechanical damage. Contact without rust, plating not oxidized and not peeled. | - | |
| Dimension | According to drawings | - | |
| Interchangeability | Exchangeable with same specification products. | - | |
| Material | Terminal: Phosphor bronze, Tin Plating: 3~4m | Housing: PA66 (UL94V-0), Color: White | |
| Material | Contact Pin: Phosphor bronze, Tin Plating: 3~4m | Housing: Nylon66 (UL94V-0), Color: White | |
| Material | Contact Pin: Phosphor bronze, Gold Plating: 3~4m | Opening Wafer Housing: Nylon46 (UL94V-0), Color: Beige | |
| Material | Contact Pin: Phosphor bronze, Tin Plating: 3~4m | Lips Wafer Housing: PBT (UL94V-0), Color: White | |
| Material | Contact Pin: Phosphor bronze, Tin Plating: 3~4m | Solder tabs: Phosphor bronze, Tin Plating: 3~4m | |
| Material | Contact Pin: Phosphor bronze, Tin Plating: 3~4m | Tiepian Wafer Housing: Nylon46 (UL94V-0), Color: Beige | |
| Electrical Performance | Rated Voltage | 250V AC/DC | |
| Electrical Performance | Rated Current | 3A AC/DC | |
| Electrical Performance | Contact Resistance | 0.01 (10 m) | |
| Electrical Performance | Insulation Resistance | 1000M (100 M) | |
| Electrical Performance | Dielectric Strength | 1000V AC/minute | |
| Mechanical Performance | Male contact Retention force | 10N per pin | |
| Mechanical Performance | Female contact Retention force | 10N per pin | |
| Mechanical Performance | Plug-in force | 3N per pin | |
| Mechanical Performance | Plug-out force | 0.5N per pin | |
| Endurance Characteristics | Solderability | Time: 2.50.5S, Temperature: 2305, Area of Soldering: 95% | - |
| Endurance Characteristics | Resistance to soldering Heat | Time: 51S, Temperature: 2305, Appearance: No Damage | - |
| Endurance Characteristics | Heat test | Time: 96h, Temperature: +853, Appearance: No Damage, Contact resistance: 20 m | - |
| Endurance Characteristics | Cold test | Time: 48h, Temperature: -253, Appearance: No Damage, Contact resistance: 20 m | - |
| Endurance Characteristics | Temperature Cycling | Low temp: -253, High temp: 853, 5 cycles. Appearance: No Damage, Contact resistance: 20 m | - |
| Endurance Characteristics | Constant Humidity | Temperature: 602, Relative humidity: 90%-96% RH, Time: 96h, Appearance: No Damage, Contact resistance: 20 m, Insulation Resistance: 100 M | - |
| Endurance Characteristics | Salt Spray | Concentration: 51%, Temperature: 352, Time: 162h, Appearance: No Damage, Contact resistance: 20 m | - |
| Packaging | Inner packaging: Plastic bag (housing), Panel mounting attach material packing (terminal). Marked with product name, specification model, quantity, date. | Exterior package: Carton. Marked with packing list, product name, specification model, quantity, date of dispatch. Product must not rock in the box. | |
| Transportation | Allow any way transportation, prevent wetness and mechanical injury. | - | |
| Storage | Ambient temperature: -10 to +40, Relative humidity 80%. Store in a warehouse without acidic, alkaline, or corrosive gases. | - |
