Scope: This specification covers the 2.54mm Pin Header spacing Connector series.
| Product Name | Part Number | Rated Voltage (Max) | Rated Current (Max) | Ambient Temperature |
|---|---|---|---|---|
| 210S-1*XP (Single Row Straight Pin) | 250V AC/DC | 3A | -40-+105 | |
| 210R-1*XP (Single Row Right Angle Pin) | 250V AC/DC | 3A | -40-+105 | |
| 210S-2*XP (Double Row Straight Pin) | 250V AC/DC | 3A | -40-+105 | |
| 210R-2*XP (Double Row Right Angle Pin) | 250V AC/DC | 3A | -40-+105 | |
| 210SMT-1*XP (Single Row SMT) | 250V AC/DC | 3A | -40-+105 | |
| 210SMT-2*XP (Double Row SMT) | 250V AC/DC | 3A | -40-+105 |
| Item | Test Condition | Requirement |
|---|---|---|
| Electrical Performance | Contact Resistance Mate connectors, reassure by dry circuit, 20mV MAX, 10mv. (Based upon JIS C5402 5.4) | 0.02 (MAX) |
| Insulation Resistance Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 method 302 condition B) | 1000 M (MIN) | |
| Dielectric Strength Mate connectors, apply 500V AC for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-ST-202 Method 301) | No breakdown and flashover | |
| Mechanical Performance | Insertion force and withdrawal force Insert and withdraw connectors at the speed rate of 253mm/minute. (30 cycles) | Insertion Force: 0.2 kg/Pin (MAX) Withdrawal Force: 0.02 kg/Pin (MIN) |
| Pin Insertion force Insert the crimped terminal into the connectors | 1.5 kg/Pin (MAX) | |
| Pin retention force Apply axial push force at the speed rate of 253mm/minute. | 0.5 kg/Pin MIN | |
| Environmental Performance and Others | Repeated insertion/withdrawal When mated up to 30 cycles repeatedly by the rate of 10 cycles per minute. Measure Contact Resistance after 30 cycles. | Contact Resistance: 40 m MAX |
| Salt spray 24 hours exposure to a salt spray from the 51% solution at 352. (Based upon JIS C5402/MIL-STD-202 method 101D conditions. B) | Appearance: No Damage Contact Resistance: 40 m MAX | |
| Solderability Soldering time: 30.5sec, solder temperature: 2305 | 95% or more solderable area | |
| Resistance to soldering heat Soldering time: 51sec, solder temperature: PBT: 2205, PA6T: 2605, PA9T: 2705 | Appearance: No Damage | |
| Life Test 500 cycles | Appearance, Function: No Damage |
| Category | Details |
|---|---|
| Product Shape, Dimensions and Materials | (Refer to attached drawings) |
| Packaging | Inner packaging: Blister box. Outer packaging: Carton box. Products sealed in the box without shaking. |
| Transportation | All modes of transport are allowed, but avoid direct rain, snow and mechanical damage. |
| Storage | Conditions: Store in a warehouse with ambient temperature of -10~40, relative humidity not greater than 80%, and no acidic, alkaline or other corrosive gases in the surrounding air. Shelf Life: 12 months. Re-inspection required after 12 months. It is most suitable to use within 3 months. The company is not responsible for any abnormalities found when used beyond the storage period. |
