This specification covers the 2.54mm Pin Header spacing Connector series. The series includes single row straight pin, single row right angle pin, double row straight pin, double row right angle pin, and SMT types.
Applications: Electronic connectors for various applications.
| Product Name | Part Number Series | Rated Voltage (Max) | Rated Current (Max) | Ambient Temperature |
|---|---|---|---|---|
| 210S-1*XP (Single Row Straight Pin) | 210S-1*XP | 250V AC/DC | 3A | -40-+105 |
| 210R-1*XP (Single Row Right Angle Pin) | 210R-1*XP | 250V AC/DC | 3A | -40-+105 |
| 210S-2*XP (Double Row Straight Pin) | 210S-2*XP | 250V AC/DC | 3A | -40-+105 |
| 210R-2*XP (Double Row Right Angle Pin) | 210R-2*XP | 250V AC/DC | 3A | -40-+105 |
| 210SMT-1*XP (Single Row SMT) | 210SMT-1*XP | 250V AC/DC | 3A | -40-+105 |
| 210SMT-2*XP (Double Row SMT) | 210SMT-2*XP | 250V AC/DC | 3A | -40-+105 |
| Item | Test Condition | Requirement |
|---|---|---|
| 3.1 Electrical Performance | ||
| Contact Resistance | Mate connectors, reassure by dry circuit, 20mV MAX, 10mv. | 0.02 (MAX) |
| Insulation Resistance | Mate connectors, apply 500V DC between adjacent terminal or ground. | 1000 M (MIN) |
| Dielectric Strength | Mate connectors, apply 500V AC for 1 minute between adjacent terminal or ground. | No breakdown and flashover |
| 3.2 Mechanical Performance | ||
| Insertion and withdrawal force (Whole connector) | Insert and withdraw connectors at the speed rate of 253mm/minute. (30 cycles) | Insertion: 0.2 kg/Pin (MAX), Withdrawal: 0.02 kg/Pin (MIN) |
| Pin Insertion force (Single Pin) | Insert the crimped terminal into the connectors. | 1.5 kg/Pin (MAX) |
| Pin retention force (Single Pin) | Apply axial push force at the speed rate of 253mm/minute. | 0.5 kg/Pin (MIN) |
| 3.3 Environmental Performance and Others | ||
| Contact Resistance (after Repeated insertion/withdrawal) | When mated up to 30 cycles repeatedly by the rate of 10 cycles per minute. | 40 m (MAX) |
| Salt Spray | 24 hours exposure to a salt spray from the 51% solution at 352. | Appearance: No Damage, Contact Resistance: 40 m (MAX) |
| Solderability | Soldering time: 30.5 sec, solder temperature: 2305. | 95% above solderable area |
| Resistance to Soldering Heat | Soldering time: 51 sec, Temperature: PBT: 2205, PA6T: 2605, PA9T: 2705. | Appearance: No Damage |
| Life Test | 500 cycles | Appearance & Function: No Damage |
| Item | Description |
|---|---|
| Packaging | Inner packaging: Blister box. Outer packaging: Carton box. Sealed within the box without shaking. |
| Transportation | Allowed by any means, but avoid direct rain/snow and mechanical damage. |
| Storage Conditions | Environment temperature: -10~40, Relative humidity: 80%. Store in a warehouse free from acidic, alkaline, or other corrosive gases. |
| Shelf Life | 12 months. Re-inspection required after 12 months. Recommended to use within 3 months. Company is not responsible for abnormalities found beyond the shelf life. |
