The 1.5mm-3P LT series connector is designed for reliable electrical connections in various applications. It offers a temperature range of -25 to 85 and is suitable for PCB thicknesses between 1.2mm and 1.6mm. With a rated voltage of 250V AC/DC and a rated current of 2A, it ensures stable performance for signal and power transmission.
| Item | Requirement | Details |
| General Tolerances | Linear | X.X: 0.15, X.XX: 0.10, X.XXX: 0.05 |
| Angular | X.X: 1.00, X.XX: 0.50, X.XXX: 0.25 | |
| Use Condition | Ambient Temperature Range | -25+85 |
| Applicable PC board thickness | 1.2~1.6mm | |
| Electrical Performance | Rated Voltage | 250V AC/DC |
| Rated Current | 2A AC/DC | |
| Contact Resistance | 20 m | |
| Insulation Resistance | 1000M | |
| Dielectric Strength | 500V AC/minute | |
| Mechanical Performance | PIN Retention Force | 10N per pin |
| Terminal Retention Force | 10N per pin | |
| Plug-in Force | 3N per pin | |
| Plug-out Force | 0.5N per pin | |
| Endurance Characteristics | Soldering Rest (Washing) | Time: 2.50.5S, Temperature: 2605, Area of Soldering: 95% |
| Resistance to Soldering Heat | Time: 51S, Temperature: 2605, Appearance: No Damage | |
| Heat Test | Time: 96h, Temperature: +853, Appearance: No Damage, Contact resistance: 20 m | |
| Cold Test | Time: 48h, Temperature: -253, Appearance: No Damage, Contact resistance: 20 m | |
| Temperature Cycling | Low temp: -253, High temp: 853, 5 cycles. Appearance: No Damage, Contact resistance: 20 m | |
| Constant Humidity Heat | Temperature: 602, Relative humidity: 90%-96% RH, Time: 96h, Appearance: No Damage, Contact resistance: 20 m, Insulation Resistance: 100M | |
| Salt Spray Test | Salt concentration: 51%, Temperature: 352, Time: 162h. Appearance: No Damage, Contact resistance: 20 m | |
| Material Details | Terminal | Phosphor bronze, Thickness: 0.15mm/0.30mm, Plating: Tin Plating: 3~4m / Gold Plating: 3~4m |
| Housing | LCP (UL94V-0), Nylon66 UL94V-0, Nylon46 UL94V-0, PBT UL94V-0 |
