The OUPIIN 2011 Series Pin Header is a 2.54mm pitch connector available in single, double, and triple row configurations. It supports both straight and right-angle mounting with a solder-type termination. Designed for reliable electrical connections, this series is manufactured by Oupiin Electronic Co., Ltd. and adheres to RoHS compliance for harmful material control.
| Product Name | Part No. | Drawing No. | Description | Rating Current | Rating Voltage | Storage Temperature | Operating Temperature | Solder Coverage |
| 2011 Series Pin Header 2.54mm Single Row Straight/Right Angle Solder Type | 2011-1XxxGxx(T)Sx-x | 2011D01042 | Single Row Straight/Right Angle Solder Type | 3A | 110V AC | 0~+40, Humidity80%RH under | -40~+105 | 95% minimum |
| 2011 Series Pin Header 2.54mm Single Row Straight/Right Angle Solder Type | 2011-1XxxGxx(T)RB | 2011D01003 | Single Row Straight/Right Angle Solder Type | |||||
| 2011 Series Pin Header 2.54mm Single Row Straight/Right Angle Solder Type | 2011-1XxxGxx(T)LB | 2011D01105 | Single Row Straight/Right Angle Solder Type | |||||
| 2011 Series Pin Header 2.54mm Single Row Straight/Right Angle Solder Type | 2011-1XxxG00RW-4-4-0.4B | 2011D01077 | Single Row Straight/Right Angle Solder Type | 3A | 110V AC | 0~+40, Humidity80%RH under | -40~+105 | 95% minimum |
| 2011 Series Pin Header 2.54mm Double Row Straight/Right Angle Solder Type | 2011-2XxxGxx(T)SB | 2011D01004 | Double Row Straight/Right Angle Solder Type | |||||
| 2011 Series Pin Header 2.54mm Double Row Straight/Right Angle Solder Type | 2011-2XxxGxx(T)RB | 2011D01102 | Double Row Straight/Right Angle Solder Type | |||||
| 2011 Series Pin Header 2.54mm Triple Row Straight/Right Angle Solder Type | 2011-3XxxGxx(T)SB | 2011D01005 | Triple Row Straight/Right Angle Solder Type | 3A | 110V AC | 0~+40, Humidity80%RH under | -40~+105 | 95% minimum |
| 2011 Series Pin Header 2.54mm Triple Row Straight/Right Angle Solder Type | 2011-3XxxGxx(T)RB | 2011D01103 | Triple Row Straight/Right Angle Solder Type |
| Item | Requirements | Test Methods |
| Contact Resistance | 20 m Max. | Subject mated contacts assembled in housing to open circuit of 100 mA max. 20 mV max. Per EIA-364-06 |
| Insulation Resistance | 1000 M Min. | Measure by applying test potential between the adjacent contacts, and between the contacts and ground in the mated connector. (500V DC) Per EIA-364-21 |
| Dielectric Withstanding Voltage | After testing, there shall be no breakdown. | Connector must withstand test potential of 1000V AC for 1 minute. Per EIA-364-20 |
| Retention Force | 0.8 Kg/pin. Min | Apply axial pullout force the speed rate of 25.4 mm/minute. Per EIA-364-29 |
| Solder ability | There shall have a solder coverage of 95% minimum. | Soldering time3 to 5 seconds. Temperature2455 Per EIA-364-52 |
