This document outlines the specifications for a series of connectors from TE Connectivity, designed for PC board mounting. The product features a controlled document status and is intended for applications requiring specific PC board hole patterns and thicknesses. Key dimensions and tolerances are provided for various configurations, facilitating integration into electronic assemblies.
| Part Number | Key Position | Number of Positions (n) | Dimension A (mm) | Dimension B (mm) | Dimension C (mm) | Drill Diameter (mm) | Round Diameter (mm) |
|---|---|---|---|---|---|---|---|
| 1-1827875-2 | X | 4 | 7.6 | 6.0 | 2.5 | 1.5 0.1 | 1.6 0.1 |
| 2-1827875-2 | Y | 4 | 7.6 | 6.0 | 2.5 | 1.5 0.1 | 1.6 0.1 |
| 1-1827875-3 | X | 6 | 10.1 | 8.5 | 5.0 | 1.5 0.1 | 1.6 0.1 |
| 2-1827875-3 | Y | 6 | 10.1 | 8.5 | 5.0 | 1.5 0.1 | 1.6 0.1 |
| 1-1827875-4 | X | 8 | 12.6 | 11.0 | 7.5 | 1.5 0.1 | 1.6 0.1 |
| 2-1827875-4 | Y | 8 | 12.6 | 11.0 | 7.5 | 1.5 0.1 | 1.6 0.1 |
| 1-1827875-5 | X | 10 | 15.1 | 13.5 | 10.0 | 1.5 0.1 | 1.6 0.1 |
| 2-1827875-5 | Y | 10 | 15.1 | 13.5 | 10.0 | 1.5 0.1 | 1.6 0.1 |
| 1-1827875-6 | X | 12 | 17.6 | 16.0 | 12.5 | 1.5 0.1 | 1.6 0.1 |
| 2-1827875-6 | Y | 12 | 17.6 | 16.0 | 12.5 | 1.5 0.1 | 1.6 0.1 |
| 1-1827875-8 | X | 16 | 22.6 | 21.0 | 17.5 | 1.5 0.1 | 1.6 0.1 |
| 2-1827875-8 | Y | 16 | 22.6 | 21.0 | 17.5 | 1.5 0.1 | 1.6 0.1 |
| 1-1827875-0 | X | 20 | 27.6 | 26.0 | 22.5 | 1.5 0.1 | 1.6 0.1 |
| 2-1827875-0 | Y | 20 | 27.6 | 26.0 | 22.5 | 1.5 0.1 | 1.6 0.1 |
| General Tolerances: Unless otherwise specified: 0 PLC, 1 PLC, 2 PLC, 3 PLC, 4 PLC | |||||||
| Header Housing (HDR HSG) Keying: X (Cavity Mark: Capital Letter) | |||||||
| Retention Leg: Both Sides | |||||||
| PC Board Hole Pattern: Connector Mount Side (Not Accumulate Tolerance) | |||||||
| Drill Diameter (General): 0.8 0.05 | |||||||
| Round Diameter (General): 2.3 MIN | |||||||
