This instruction sheet provides a brief introduction to the operation of the 2Pin latched wire to wire poke-in connector. It is mainly applicable to products: 2834048-1, 2834048-2, 2834048-3, 2834048-4, 2834049-1, 2834049-2, 2834049-3, 2834049-4, 1-2834049-1, 1-2834049-2, 1-2834049-3, 1-2834049-4, 2-2834049-1, 2-2834049-2, 2-2834049-3, 3-2834049-1, 3-2834049-2, 2834050-1, 2834050-2, 2834050-3, 2834050-4. For more detailed information, please refer to the application specification 114-137159.
| Wire Type | Wire Range | Stripped Wire Diameter (Tin Plated) | Diameter Tolerance |
| Solid Wire/Single Strand Wire (Pure Copper) | 18-22 AWG | Not specified | Not specified |
| Stranded Tinned Wire | 16-20 AWG (16 AWG: max 26 strands, 18 AWG: max 16 strands, 20 AWG: max 7 strands) | 16 AWG: 1.65mm 18 AWG: 1.35mm 20 AWG: 1.15mm | +/-0.1mm |
| Assembly Specification | Details |
| Insertion Angle | 10 max |
| Straight Wire Length Before Bending | Minimum 5mm after wire insertion or during customer application |
| Connector Replacement/Repair | Parts and wires within the connector are not replaceable/repairable. Do not use defective/damaged parts. |
